Completed The Higher Advanced Electronics Repair Course

By on July 28, 2018
technical repair course

 

 

 

 

 

 

 

 

 

Just completed another Higher Advanced Electronics Repair Course  for 5 participants. For  your information the participants from Indonesia and India took all the three repair courses (9 days) and they were happy to learn so many repair tips and secrets within this short period of time. There was also a student that had taken my Basic and Advanced Repair courses two years ago and he came again for this Higher Advanced Repair course. For more information about the repair courses, please visit this link. Below  are the photos taken during the three days repair course:

motherboard repair course

bga repair course

bga rework course

power supply repair courses

atx power supply troubleshooting

electronics repair training

electronics technician certication

lunch time with students

Likes(21)Dislikes(0)

11 Comments

  1. Robert Calk Jr.

    July 30, 2018 at 12:24 am

    Congratulations!

    Likes(0)Dislikes(0)
    • Jestine Yong

      July 30, 2018 at 7:27 am

      Hi Robert,

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  2. Parasuraman

    July 30, 2018 at 10:32 am

    Congratulations!

    Likes(0)Dislikes(0)
    • Jestine Yong

      July 30, 2018 at 11:10 am

      Hi Parasuraman,

      Thanks.

      Jestine

      Likes(0)Dislikes(1)
  3. Albert van Bemmelen

    July 30, 2018 at 3:18 pm

    Always very inspiring to see how participants make their training a big success! And those meals after a hard days work look very inviting!
    Question:
    What (Blue) solder iron/gun or station do they use at Noahtech?

    Likes(0)Dislikes(0)
    • Jestine Yong

      July 30, 2018 at 5:48 pm

      Hi Albert,

      We are using Hakko Presto 981 solder gun.

      Jestine

      Likes(1)Dislikes(0)
      • Waleed Rishmawi

        August 20, 2018 at 3:59 pm

        these are very good ones. it has one problem though, the screws on them, break very easily. I have gone through many of them and now I am using the hakko Fx951 and I am loving it

        Likes(0)Dislikes(0)
  4. Humberto

    August 1, 2018 at 11:06 pm

    Congratulations to everybody.

    Likes(1)Dislikes(0)
    • Jestine Yong

      August 2, 2018 at 7:39 am

      Hi Humberto,

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  5. emmasoft Amunah

    August 2, 2018 at 5:31 pm

    i feel so happy seeing guys advancing to higher levels, i really needed to achieve that goal bt only that am far away in uganda, what do i do..?

    weldone guys,best of luck!

    Likes(0)Dislikes(0)
    • Jestine Yong

      August 2, 2018 at 7:48 pm

      Hi Emmasoft,
      Thanks. This is a hands on practical course and it can't be taught online. You need to come over here and learn.

      Jetsine

      Likes(1)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.