- Sanyo DP40142 LED/LCD TV Repair
- LED Backlight Problem In LG TV- Checked With LED TV Backlight Tester
- Unexpected Shorted Parts In LG LED TV
- How To Repair LED TV Mainboard
- You Will Be Stunned Of What’s Found Inside The TV (No Power Fault)
- Shorted SMD Transistor In LED TV
- Never Saw TV LED Lights Like These
- Simple Way To Repair Color Problem In LED TV
- A LED TV Repair Attempt With A Disappointing Result
- How To Repair No Power Symptom In LED TV
EPSON All In One Printer Repaired
In my busy schedule I had a call from one of my customers that his printer was not working. On asking about the nature of symptom he explained to me that printer was making loud noise and stop printing.
So I requested him to visit my workshop to bring the printer for further troubleshooting. Eventually he visited my workshop next day because I already have some consignment on that day.
So next day on my workbench I got that printer that was “EPSON AIO L210” inkjet printer. For diagnosis I have powered the printer and I found that while initialize printer cartridge cradle getting stuck following scrambling noise and front panel LED Indicators started blinking-see photo below:
This printer was having external ink tank so user can refill the ink himself. I have checked ink tank and found up to the mark that means ink supply up to the printer head was ok. So I opened the mechanism for further visual inspection.
This type of problem mainly because either
1) If cartridge cradle carriage is not moving smoothly.
2) Timing belt or carriage motor is bad.
3) Head cable or Encoder sensor is bad.
4) Encoder strip is bad.
5) IO Logic board itself bad.
So after power off the printer I have moved the cradle unit by my hand and found it was moving very smooth even no need to lubricate while in this process I found some ink patches on the encoder strip.
So I have removed the encoder strip and try to clean the Strip with dry tissue paper and IPA but unable to clean the ink patches. Hence I have ordered new encoder strip.
After replacing new encoder I have powered the printer and the result was positive and the error gone. That means the culprit is encoder strip- problem solved.
This article was prepared for you by Yogesh Panchal who works as a Computer Hardware Engineer in Mumbai India.
Please give a support by clicking on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments.
P.S- Do you know of any your friends who would benefit from this content that you are reading now? If so, forward this website to your friends or you can invite your friends to subscribe to my newsletter for free in this Link.
Note: You can check his previous repair articles in the link below: