- Blinking Stand By LED Light In LED TV Repaired
- No Tuning Problem In LED TV Repaired
- Sanyo DP40142 LED/LCD TV Repair
- LED Backlight Problem In LG TV- Checked With LED TV Backlight Tester
- Unexpected Shorted Parts In LG LED TV
- How To Repair LED TV Mainboard
- You Will Be Stunned Of What’s Found Inside The TV (No Power Fault)
- Shorted SMD Transistor In LED TV
- Never Saw TV LED Lights Like These
- Simple Way To Repair Color Problem In LED TV
Iphone With Bad Wi-Fi Signal Repaired
My son, a seven years boy, approached me with a question: Dad, why I do not have internet connection on this phone? I looked at his lovely face and said, I do not know son, let me take a look at it. Sure enough, when I looked it, there was no signal and when I went to connections in settings, there was no connection found. It was searching but no internet connection to connect to.
It is a 5c Iphone and if you look where the Wi-Fi signal suppose to be, it is not found. I promised him to get it fixed as soon as possible.
Today, this morning before he went to school, he reminded me of it. So here I am making his wish come true.
The first thing to do is to take out the two screws on the bottom of the phone. Second step is to take out the screen assembly.
Carefully and slowly I attached the opening tool to the phone and with one move, the phone was open and ready to be repaired.
The next step is to disconnect the battery. That is an important thing to remember in repairing any smart phone.
After disconnecting the battery, pull the screen up 90 degrees, you will see the screen shield that is marked with four arrows. Unscrew these one and mark them.
It is very useful to know where every screw come from and make sure it goes back the same place. There are different size screws and if they got mixed up and placed in the wrong hole, it could damage your phone.
Screen is off here and next is to take the board out. There are a lot of screws holding the board. Again, make sure you make every screw that comes off and put it back the way it was when done with the repair.
Another remark that I need to add is to be careful when taking the board off the housing. The antenna cable is still attached to the lower side of the lower side of board
As you can see, the board is off and the next step is to take the Wi-Fi antenna off the board. Here is where it is located.
The problem is very clear why we have no internet connection. Can you see it?
Yes, the Wi-Fi antenna is supposed to have a socket to be connected to the logic board of the phone. It is missing.
I could not find a new antenna replacement so I used one of old ones that I have in the shop. Can you see the difference between the two?
I put the replacement on the phone, put the logic board in the housing connected everything back the way it was and paying extra attention to the screws and I turned on the phone.
As you can see, the Wi-Fi signal is restored and now my son can enjoy the positive side of the World Wide Web. My son loves to watch (you tube) and he loves the educational programs there. Of course, in my house, the internet is monitored with a special device that allows certain sites to be displayed and certain ones to be blocked.
My son is going to be very happy with this repair and I am sure the smile on his face is what I am looking forward to. Mission accomplished.
This article was prepared for you by Waleed Rishmawi, one of our ‘Master Authors’ and currently working in the Bethlehem area of Palestine repairing electrical and electronic equipment.
Please give a support by clicking on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments. If you have electronic repair articles to share with us, please contact us HERE.
P.S- If you enjoyed reading this, click here to subscribe to my blog (free subscription). That way, you’ll never miss a post. You can also forward this website link to your friends and colleagues-thanks!
Note: You may check out previous post in the below link: