Don't Miss

TDA7266 IC Faulty Causing No Sound In TV

By on September 4, 2018
tda7266sa ic datasheet

 

 

 

 

 

 

 

 

 

 

 

SINGER TV NO SOUND REPAIR

A customer of mine sent to me this Singer Slim TV with the complaint of no sound but other features were all fine. Usually, if there is no sound in TV, the problem could be due to:

  1. Bad speakers
  2. Broken speaker cables
  3. Dry joints in the audio IC
  4. Improper or missing DC  supply voltage the audio IC
  5. Faulty Audio IC
  6. Corrupted EEPROM data and etc




So in this case I checked on the speakers first since this is the most easiest component to check. I took out the speakers cables and checked and found that both have low  and same resistance which means they are both good. If no readings means the speaker resistance is already open circuit. You can click here to read Yogesh ‘s post about checking TV speakers. Next, I tested the output audio jack using external speakers and there were no sound too.

no sound in tv repair

The next test I performed was to measure the DC supply voltage to the audio IC TDA7266 and it showed 11.9 VDC which also means good-see the two photos below:

no sound in tv fixed

testing ic voltage

I left only one choice which is to direct replace the audio IC TDA7266 and retest the set. I had in stock this IC and replaced and retested the sound.




Surprisingly the sound came back after the IC replacement.

tda7266sa ic

You can click on the IC datasheet below to view the complete information about this amplifier IC.

 

tda7266 datasheet

I was so happy that the sound came back to life and wish to let you listen to the TV sound. I could only captured the photo of a working TV -below photo:

NO SOUND IN TV REPAIR AND FIX

Conclusion- Assuming if after the replacement of the IC and the TV still has no sound, the next test would be to check on the EEprom IC. You can click here to check on my previous post about faulty EEPROM IC that has caused no sound in TV. If you wants to be good in CRT TV repair you can check out Humphrey’s ebook Here.

suranga

This article was prepared for you by Suranga Bandara who owns an Electronics repair shop in Anuradapura, Sri Lanka.




Please give a support by clicking on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments. If you have electronic repair articles to share with us, please contact us HERE.

P.S-  If you enjoyed reading the above article, click here to subscribe to my blog (free subscription). That way, you’ll never miss a post. You can also forward this website link to your friends and colleagues-thanks!

Note: You may check out his previous post in the below links:

https://jestineyong.com/16-33-v-5-47v-x-2-linear-transformer-fault/

 

Likes(82)Dislikes(0)

11 Comments

  1. Albert van Bemmelen

    September 4, 2018 at 9:14 pm

    Good job! They might as well make these TDA Audio amplifier IC's Plug-And-Play with decent sockets in the rate they tend to fail and have to be replaced in lots of repairs.

    Likes(1)Dislikes(0)
  2. Parasuraman S

    September 4, 2018 at 9:20 pm

    Excellent professional approach and solution!

    Likes(2)Dislikes(0)
  3. Yogesh Panchal

    September 5, 2018 at 12:47 am

    Good Job! suranga

    Likes(1)Dislikes(0)
  4. Henrique Jorge Guimarães Ulbrich

    September 6, 2018 at 12:06 am

    Good job, Suranga. And I agree with Albert about the need of decent sockets. However, this would bring about an increase of production costs, and the manufacturers don´t like this.

    Likes(1)Dislikes(0)
  5. beh

    September 6, 2018 at 10:59 am

    Hi Suranga
    Is very useful repair report like other ones.
    thanks.
    beh

    Likes(2)Dislikes(0)
  6. Humberto

    September 7, 2018 at 11:40 pm

    Good repair Suranga.

    Likes(1)Dislikes(0)
  7. Robert Calk Jr.

    September 8, 2018 at 1:28 pm

    Good job, Suranga.

    Likes(1)Dislikes(0)
  8. Justice

    September 13, 2018 at 8:15 pm

    Very technical work above all interesting thank you Suranga.

    Likes(0)Dislikes(0)
  9. Tyrone Arendse

    September 14, 2018 at 12:48 am

    Good explanation on how to troubleshoot

    Likes(0)Dislikes(1)
  10. Hamisu

    July 23, 2020 at 8:38 am

    I check the DC volage to ic is normal and I test the IC is good. What going to be the problem help please.

    Likes(0)Dislikes(0)
  11. umut

    March 5, 2021 at 5:19 am

    new TDA7266SA FAKE

    Likes(1)Dislikes(0)

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close