Just completed today the Advanced Electronics Repair course for 4 participants. Check out the photos below: For more information about the electronics repair course in Malaysia do visit the link HERE. Likes(14)Dislikes(0)

                My customer sent to me his HP LaserJet 3030 printer which won’t startup (no power). When I asked what caused the problem, he told me there was some problem in...

                Foreword: As I enjoy every single article from this blog and don’t do much repair works anymore (except for domestic purposes!) I would like to contribute with some of...

                The complaint was no power. This LED Monitor uses an external power adapter and the output voltage was tested good (19 volt DC). Since the power adapter was tested...

                    Today I finally fixed a Power Supply (For Home or Office use !) Model: SS-300FS Active PFC that I had looked at months earlier but couldn’t fix....

              The Conceptronic 90 Watt Universal Power Supply controller ic was completely blown up-identified It was soldered to the bottom side of the pcb. But was not readable anymore because the...

                  A friend of mine brought to me this radio receiver brand OPTIMUS (AM/FM), I do not know the Model No.: because it was erased, it’s an old model....

                  Just completed today a two and a half day website building, blogging and internet marketing course for 5 participants. After this course, they could build any type of...