Comments on: A Bizzare Way Of Opening Garden LED Flood Light Model ECOLINK

By: Mark J

Mark J — Mon, 07 Apr 2025 20:13:25 +0000

You are welcome. Just returning the favor. I always welcome your input. I have learned a lot from your articles. Thank you again for sharing and commenting.

Likes(0)Dislikes(0)

By: Parasuraman S

Parasuraman S — Mon, 07 Apr 2025 12:04:28 +0000

In reply to Waleed Rishmawi.

Many thanks for your continued supportive comments, dear friend! I was just wondering how come you never came up and here you are!

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 07 Apr 2025 07:52:06 +0000

that is a lot of work to replace the LEd board but it was worth it since it belonged to the hospital..i like what you said that I work in a HOSPITAL and this DEAD device came to me for repair.LOL. have a blessed day and thanksf for sharing.

Likes(2)Dislikes(0)

By: Parasuraman S

Parasuraman S — Mon, 07 Apr 2025 07:39:35 +0000

In reply to muykit.

Very spiritually enlightening comments! Many thanks for your concern too and sharing experiences and suggestions!

Likes(1)Dislikes(0)

By: Parasuraman S

Parasuraman S — Mon, 07 Apr 2025 07:37:19 +0000

In reply to Hollis LuQuette.

Thanks for your inputs and comments! Shall try next time.

Likes(0)Dislikes(0)

By: Parasuraman S

Parasuraman S — Mon, 07 Apr 2025 07:36:32 +0000

In reply to Mark J.

I did not. Even Albert has suggested the same. Shall try next time. I have observed that it melts plastic, but no idea whether it would melt rubber of this type. Thanks for your input

Likes(1)Dislikes(0)

By: Parasuraman S

Parasuraman S — Mon, 07 Apr 2025 07:35:04 +0000

In reply to Henrique Jorge G. Ulbrich.

The manufacturer's idea was to use and throw. But we defeated it by brutal tactics! (LOL) Thanks for your comments!

Likes(1)Dislikes(0)

By: muykit

muykit — Mon, 07 Apr 2025 06:16:19 +0000

Safety first. Lets take care with solvents, adhesives and detergents. Some may be corrosive, flamable or toxic to inhale. I have times without number seen such substances accidentally spilll on my workbench. 'Mr A stronaut', you left your hands and feet bare hence making yourself vulnerable to the minor bruises. I too once in a while suffer the pain inflicted by hot and tiny dropping solder balls, and also a hot soldering gun. Your pursuit to succeed remained unhindered by a strong determination. A high degree of endurance and maintaining a forcused mindset made you to ultimately carry the day. There is no better way of showng the abudance of love for your work. The lamp will now shine where darkness abounds because someone passionate made a mental, physical and financial sacrifice. Thanks for further sacrificing to prepare a 'lamp of knowledge' in the form of a lengthy article. The 'lamp of knowledge' provides light in the 'dark technology pathways' for impatient readers and learners, the likes of muykit.

Likes(2)Dislikes(0)

By: Hollis LuQuette

Hollis LuQuette — Sun, 06 Apr 2025 17:25:17 +0000

You had one tough project right there , but you came out the winner . I was going to suggest Acetone like Albert did , I use it a lot , it makes the hard stuff soft. I also use 99 percent alcohol on quite a few items in VCR's and Cassette tape players.

Likes(1)Dislikes(0)

By: Mark J

Mark J — Sun, 06 Apr 2025 16:23:57 +0000

Parasuraman did you try acetone or nail polish remover? That works for me most of the time when I need to open something that is glued. Good job on the repair. Thank you for sharing you knowledge and experience.

Likes(3)Dislikes(0)