Comments on: A Digital Audio Player With USB Broken On Board Repaired

By: Kelvin

Kelvin — Fri, 25 Aug 2023 13:57:57 +0000

Well done sir

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Wed, 09 Aug 2023 03:57:44 +0000

In reply to Yogesh Panchal.

Yogesh: thanks man. Have a blessed day

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Mon, 07 Aug 2023 06:51:46 +0000

Good Fix! Waleed

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 07 Aug 2023 05:49:10 +0000

In reply to Imran.

Imran: thanks man. have a blessed day

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 07 Aug 2023 05:48:37 +0000

In reply to Anwar Yunas Shiekh.

Anwar: yes. low melt is only used for extraction not the final soldering. have a blessed day

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 07 Aug 2023 05:47:33 +0000

In reply to Anwar Yunas Shiekh.

Anwar: totally agree. have a blessed day

Likes(2)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 07 Aug 2023 05:47:02 +0000

In reply to Tayo.

Tayo: the device is not used for battery powered cars. it is just a tiny device you carry around to hear music through a head phone jack or you can connect it to an amplifier for louder sound. have a blessed day.

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 07 Aug 2023 05:45:05 +0000

In reply to Anwar Yunas Shiekh.

Anwar: low melt solder is used only to de solder when I put the replace the part I add normal solder NOT low melt solder. have a blessed day

Likes(1)Dislikes(0)

By: Imran

Imran — Sat, 05 Aug 2023 21:46:06 +0000

Good job !

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Sat, 05 Aug 2023 21:29:37 +0000

In reply to Albert van Bemmelen.

Albert: you use low melt solder to de solder stuff out only. Once the stuff is soldered out, you add normal solder for stronger joints. Have a blessed day

Likes(2)Dislikes(0)