Comments on: A PS4 With No Display Repaired And Maintained https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/ Semiconductors, Test Equipments, Circuit Board Troubleshooting, Electronic Repair Courses and Many More! Mon, 31 Jul 2023 05:38:41 +0000 hourly 1 https://wordpress.org/?v=5.4.19 By: Waleed Rishmawi https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404831 Mon, 31 Jul 2023 05:38:41 +0000 https://jestineyong.com/?p=30582#comment-404831 In reply to Imoudu.O.

Imoudu:
yes the low melt solder is needed all the time if you deal with sensitive components around the soldering area. we as tech's trying to avoid smoking parts on any borad. have a blessed day

Likes(0)Dislikes(0)
]]> By: Waleed Rishmawi https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404830 Mon, 31 Jul 2023 05:37:01 +0000 https://jestineyong.com/?p=30582#comment-404830 In reply to Yogesh Panchal.

Yogesh: thanks man. yes the problem happens usually on the inside and hardly on the outside. checking it with a microscope is the right thing to do. have a blessed day

Likes(0)Dislikes(0)
]]> By: Imoudu.O https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404818 Sun, 30 Jul 2023 21:53:44 +0000 https://jestineyong.com/?p=30582#comment-404818 I think I need this low melt solder, I remember few wks ago I had to over heat a mcu on a tv mother board to the extent of smoking before it could desolder.Thanks for sharing.

Likes(0)Dislikes(0)
]]> By: Waleed Rishmawi https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404809 Sun, 30 Jul 2023 17:31:29 +0000 https://jestineyong.com/?p=30582#comment-404809 In reply to Parasuraman S.

Parasuraman: thanks man. You are most welcome and have a blessed day

Likes(0)Dislikes(0)
]]> By: Yogesh Panchal https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404806 Sun, 30 Jul 2023 16:38:35 +0000 https://jestineyong.com/?p=30582#comment-404806 Good Fix! Waleed,
Now a days many USB C type Connectors having this problem. from outside you will not come to know the socket is damaged from inside.

Likes(0)Dislikes(0)
]]> By: Parasuraman S https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404794 Sun, 30 Jul 2023 13:52:29 +0000 https://jestineyong.com/?p=30582#comment-404794 Well done, dear friend! Many thanks for sharing a valuable experience!

Likes(0)Dislikes(0)
]]> By: Waleed Rishmawi https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404790 Sun, 30 Jul 2023 13:42:36 +0000 https://jestineyong.com/?p=30582#comment-404790 In reply to Tayo.

Tayo: sure you could do that but if you have sensitive components around that part you will ruin them by exposing them to a lot of heat. Low melt solder is the best way to go. Have a blessed day

Likes(1)Dislikes(0)
]]> By: Waleed Rishmawi https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404786 Sun, 30 Jul 2023 13:39:30 +0000 https://jestineyong.com/?p=30582#comment-404786 In reply to Albert van Bemmelen.

Albert: yes low melt solder is a good thing to have but be careful there is a lot of bad low melt solder out there. There is also a low melt paste and it is good as well. Have a blessed day

Likes(2)Dislikes(0)
]]> By: Tayo https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404783 Sun, 30 Jul 2023 13:18:25 +0000 https://jestineyong.com/?p=30582#comment-404783 I've done this repair myself.
I use regular leaded solder to help desolder the port.
Works just fine.

Likes(2)Dislikes(0)
]]> By: Albert van Bemmelen https://jestineyong.com/a-ps4-with-no-display-repaired-and-maintained/comment-page-1/#comment-404766 Sun, 30 Jul 2023 11:54:25 +0000 https://jestineyong.com/?p=30582#comment-404766 I suppose low melting solder is good to have and use.
Although I myself until now never needed it to solder on or off any connector yet. But maybe I should order some low melting solder in case I do need it in the nearby future. If the price is right. Thanks for sharing.

Likes(1)Dislikes(0)
]]>