Comments on: A Simple Fix to Dead Welding Machine Brought It Back To Life

By: Waleed Rishmawi

Waleed Rishmawi — Tue, 11 Mar 2025 14:32:57 +0000

In reply to Mark J.

Mark J: thank man. This one was easy to fix but thanks anyway. Have a blessed day

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Tue, 11 Mar 2025 14:31:48 +0000

Parasuraman: thanks. That is a very good idea but he has the CO2 welding machine in his shop so using these machines will be down grade for his quality of work. Have a blessed day

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 10 Mar 2025 15:18:55 +0000

In reply to Albert van Bemmelen.

Albert: some techs too lazy to check around for repair, it took me a few minutes to find it. Have a blessed day

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 10 Mar 2025 15:16:39 +0000

In reply to YOGESH PANCHAL.

Yogesh: not a tough challenge of repair but it is ok to have an easy repair once in a while. Have a blessed day.

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 10 Mar 2025 15:14:51 +0000

In reply to Imoudu.

Imoudu: the loose nut is the fault and it had an arrow pointed to it. Beneath that loose nut there is a connection that was loose so I soldered it and screwed down the nut. Have a good day.

Likes(1)Dislikes(0)

By: Imoudu

Imoudu — Sun, 09 Mar 2025 20:52:11 +0000

In the picture I can't see a loose nut but a lifted or burnt connector, pls try to use arrow or mark to identify the faults on board.Thanks for sharing.

Likes(1)Dislikes(0)

By: Mark J

Mark J — Sat, 08 Mar 2025 20:45:08 +0000

Waleed good job on the repair. You are the welding machine expert.

Likes(3)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sat, 08 Mar 2025 12:44:21 +0000

Good fix, dear friend, the welders' man! Perhaps your brother can do away with his tool as you keep getting such machines and he can manage his work with these as testing procedures! (LOL)

Likes(4)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Sat, 08 Mar 2025 11:15:27 +0000

Indeed strange that someone failed to fix such an easy problem invain!

Likes(2)Dislikes(1)

By: YOGESH PANCHAL

YOGESH PANCHAL — Sat, 08 Mar 2025 06:58:14 +0000

Quick fix!Waleed
First time i see two NTC connected in series.

Likes(2)Dislikes(0)