Comments on: About The Blue ESR Meter Chart https://jestineyong.com/about-the-blue-esr-meter-chart/ Semiconductors, Test Equipments, Circuit Board Troubleshooting, Electronic Repair Courses and Many More! Thu, 05 Oct 2017 09:11:43 +0000 hourly 1 https://wordpress.org/?v=5.4.19 By: Jestine Yong https://jestineyong.com/about-the-blue-esr-meter-chart/comment-page-1/#comment-302798 Sun, 30 Oct 2016 14:39:39 +0000 https://www.jestineyong.com/?p=1314#comment-302798 In reply to John Peplau.

Hi John,

Yes you can do that.

Jestine

Likes(0)Dislikes(0)
]]> By: John Peplau https://jestineyong.com/about-the-blue-esr-meter-chart/comment-page-1/#comment-302776 Sun, 30 Oct 2016 06:53:17 +0000 https://www.jestineyong.com/?p=1314#comment-302776 Could I copy the chart on the meter, then take a small ruler to extend the lines further out of the graph on either sides and then draw vertical lines to create a larger chart for measuring capacitors out of range of the original graph to interpellate what the approximate value should be or just make a list of new capacitors against the ones in or out of circuit to decide what is bad ?

Likes(1)Dislikes(0)
]]> By: Jestine Yong https://jestineyong.com/about-the-blue-esr-meter-chart/comment-page-1/#comment-295805 Mon, 01 Aug 2016 02:54:22 +0000 https://www.jestineyong.com/?p=1314#comment-295805 In reply to Daniel Johnson.

Hi Daniel,
Sorry i do not have but you can use the chart in the link below to roughly guess the value:

https://jestineyong.com/esr-meter-table/

A good 100uf 400volt should be less than 0.2 Ohm. Or the best compare with the a good one and jot down the value for future reference.

Jestine

Likes(0)Dislikes(0)
]]> By: Daniel Johnson https://jestineyong.com/about-the-blue-esr-meter-chart/comment-page-1/#comment-295763 Sun, 31 Jul 2016 03:32:27 +0000 https://www.jestineyong.com/?p=1314#comment-295763 Do you have a table with ESR values for higher voltage capacitors, specifically, 400V 100uF?

Likes(0)Dislikes(0)
]]> By: admin https://jestineyong.com/about-the-blue-esr-meter-chart/comment-page-1/#comment-8567 Wed, 02 Feb 2011 01:12:27 +0000 https://www.jestineyong.com/?p=1314#comment-8567 HI Hasan,

Thanks but sorry i have no info on this.

Jestine

Likes(1)Dislikes(0)
]]> By: hasan https://jestineyong.com/about-the-blue-esr-meter-chart/comment-page-1/#comment-8559 Tue, 01 Feb 2011 07:40:12 +0000 https://www.jestineyong.com/?p=1314#comment-8559 hi sir jestine yes i 20!! My best wishes to yu and your family thanks for your news latter. I have sony vedeo projector 3lcd model no.vpl-es4 the bullb blew. The original bulb is 240 us dollar is there any modification with any cheeper bulb with 2000 lumens am willing to try .the last thing ive repaired many tv with dry joint at vertical section some at the crt board and many e caps at secondary out put all thanks to you and your team happy 2011

Likes(1)Dislikes(0)
]]> By: admin https://jestineyong.com/about-the-blue-esr-meter-chart/comment-page-1/#comment-6282 Sat, 31 Jul 2010 18:57:53 +0000 https://www.jestineyong.com/?p=1314#comment-6282 HI RIZWAN,

It is a good cap if according to the chart and not the chart on the meter. It is easier to read from the above chart then the chart provided on the meter. If you refer to the chart you will not see the esr ohm value for 100v but you can roughly take the inbetween 63v and 160v esr value. Any value that is under the chart value is good.

Jestine

Likes(0)Dislikes(0)
]]> By: Rizwan https://jestineyong.com/about-the-blue-esr-meter-chart/comment-page-1/#comment-6278 Sat, 31 Jul 2010 12:11:17 +0000 https://www.jestineyong.com/?p=1314#comment-6278 Hi i am still having problems understanding the chart i recived my blue esr meter today. but i am crap at understanding numbers. i tried out a 100v 1000uf cap i got .03 on my meter (meter has two decimal points e.g .0.0). is the cap bad or good. i am embarrassingly crap at reading and understanding numbers.

Likes(0)Dislikes(0)
]]>