Comments on: AC Stabilizer Repair https://jestineyong.com/ac-stabilizer-repair/ Semiconductors, Test Equipments, Circuit Board Troubleshooting, Electronic Repair Courses and Many More! Sun, 03 Sep 2023 23:03:32 +0000 hourly 1 https://wordpress.org/?v=5.4.19 By: Oluwafemi Francis https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-407793 Sun, 03 Sep 2023 23:03:32 +0000 https://www.jestineyong.com/?p=9642#comment-407793 Please sir my stabiliser indicate unusual light and it give out zero output.
Please sir what can I do to rectify the fault?

Likes(0)Dislikes(0)
]]> By: Ismail https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-401316 Wed, 05 Apr 2023 20:06:43 +0000 https://www.jestineyong.com/?p=9642#comment-401316 Please sir ,if input of a stabilizer is reading zero and the output is working perfectly, what could be the reason? thanks!

Likes(0)Dislikes(0)
]]> By: Gera https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-361067 Sat, 03 Aug 2019 21:02:21 +0000 https://www.jestineyong.com/?p=9642#comment-361067 Hy Florin,
What might not be useful to you might be useful to others.
If you don't mind, Florin,Master young's suggestion might help you.

Likes(0)Dislikes(0)
]]> By: Saheed Quadri https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-326049 Sun, 03 Dec 2017 16:49:59 +0000 https://www.jestineyong.com/?p=9642#comment-326049 Input -100-260
Output -220v+-6%
Model -cvr1088-1000va
Ac AVR.
I am engineering students, I used to work on electrical / electronics equipments and God always help me. there is this stabilizer with above details, It has two meters input and output, the input show 220v but output read zero. please guide me

Likes(2)Dislikes(0)
]]> By: Askia https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-324202 Tue, 24 Oct 2017 15:38:48 +0000 https://www.jestineyong.com/?p=9642#comment-324202 In reply to Jestine Yong.

please sir i have an automatic voltage regulator stabilizer the unusal red light is on and the delay light is also blinking,please what will be the problem with the stabilizer thanks.

Likes(4)Dislikes(0)
]]> By: Loveday https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-310812 Tue, 14 Mar 2017 22:23:57 +0000 https://www.jestineyong.com/?p=9642#comment-310812 I have a stabilizer that after the delay light blicks for short time and switches out the output; it stays for short time and trips off again. The unusual red light starts blinking. I changed the output relays... But.. It still continues. Please i need ur help. What could be the cause or the faulty component in it..?

Likes(5)Dislikes(0)
]]> By: Loveday https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-310810 Tue, 14 Mar 2017 22:19:05 +0000 https://www.jestineyong.com/?p=9642#comment-310810 How would one know a faulty relay in a stabilizer

Likes(0)Dislikes(0)
]]> By: reza https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-237597 Thu, 28 May 2015 12:05:02 +0000 https://www.jestineyong.com/?p=9642#comment-237597 hello mr Doraiswamy SR
thank u

Likes(0)Dislikes(0)
]]> By: Jestine Yong https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-237490 Mon, 25 May 2015 00:30:05 +0000 https://www.jestineyong.com/?p=9642#comment-237490 In reply to mahmoud_tajpour.

Hi Mahmoud,

You are welcome.

Jestine

Likes(2)Dislikes(0)
]]> By: mahmoud_tajpour https://jestineyong.com/ac-stabilizer-repair/comment-page-1/#comment-237485 Sun, 24 May 2015 20:55:31 +0000 https://www.jestineyong.com/?p=9642#comment-237485 hi dear jestine I must thank you that cause severe a lot of good information byy the engineers and technicians and repairmens send to each other.

Likes(1)Dislikes(0)
]]>