Comments on: Apple Power Adapter Cable Repaired. Model: Magsafe 2

By: Zed Pato

Zed Pato — Fri, 01 Dec 2017 12:47:21 +0000

Nice information regarding this repair Mr. Waleed

Likes(0)Dislikes(0)

By: Robert Calk

Robert Calk — Tue, 21 Nov 2017 13:39:34 +0000

In reply to Justice.

It is a good idea to check everything under load if you can, including components and batteries. In my article, https://jestineyong.com/lights-of-america-shop-light-repaired/ , a capacitor checked good, but when I put it under load with an insulation tester, it failed. Sometimes batteries will test good on voltage, but when you put it under a load it will fail.

Likes(0)Dislikes(0)

By: Robert Calk

Robert Calk — Tue, 21 Nov 2017 13:09:14 +0000

In reply to Manoj garain.

You may need to replace the FBT. First check for dry joints around the FBT and HOT, and check the HOT snubber capacitor.

Likes(0)Dislikes(0)

By: Justice

Justice — Mon, 20 Nov 2017 10:51:37 +0000

What interest me the most is the fact that it needed a LOAD to show the correct reading, wow thats new to me.Thanks Waleed.

Likes(0)Dislikes(0)

By: Albert

Albert — Sun, 19 Nov 2017 08:32:45 +0000

Thanks for this interesting Apple 3V output fact when not loaded!
I avoid working with those extremely expensive Apple devices. My shop owner friend had a costly Apple repair just recently because the Apple 27 inch iMac A1419 models have changed on how the LCD screens are attached to the glassplate. Now they are both bonded which make them all but repair friendly. They used to be separate items. But Apple changed the nice way how older models simply had a glass plate that was hold by inside magnets. Now the bonded LCD with glass plate is glued to the backshell, and removing that to get to the iMac mainboard is just impossible without breaking the glass! It did cost my friend at least 400 euro/dollar just to replace the old screen before he was able to fix the iMac internal harddisk issues. And he also had to buy the adhesive tape because it neither was included with the new iMac A1419 late 2012 model screen!

Likes(3)Dislikes(0)

By: Jon Hamilton

Jon Hamilton — Sat, 18 Nov 2017 15:06:07 +0000

Great video and very appropriate, for me as my cord is just about to break on my mac. Thanks

Likes(0)Dislikes(0)

By: Manoj garain

Manoj garain — Sat, 18 Nov 2017 14:05:02 +0000

Sir,
I have a ultrasim crt tv with a problem.when i switch on, a register in110v supply line near Flyback getting very hot with smoke.tv start but the register blow in 2/3 second.i changed hot.but problem not solve.supply voltage present 109v from prymary side.please help me

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 18 Nov 2017 13:49:32 +0000

Good job! waleed.

Likes(0)Dislikes(0)

By: Robert Calk

Robert Calk — Sat, 18 Nov 2017 13:32:25 +0000

Good job, Waleed.

Likes(0)Dislikes(0)

By: Mihai

Mihai — Sat, 18 Nov 2017 12:12:41 +0000

Hello,
Good job Mr. Waleed !

Likes(0)Dislikes(0)