Comments on: AUO 11303 LCD TV T-Con IC Faulty

By: Anand

Anand — Wed, 23 Aug 2023 16:10:04 +0000

In reply to Albert van Bemmelen.

yes you are right

Likes(0)Dislikes(0)

By: shantha

shantha — Tue, 04 Jul 2023 14:36:26 +0000

1/2 a display is view

Likes(0)Dislikes(0)

By: shantha

shantha — Tue, 04 Jul 2023 14:34:09 +0000

The above IC is too hot, why is that

Likes(0)Dislikes(0)

By: jose lopez

jose lopez — Fri, 09 Oct 2020 03:51:09 +0000

tengo una rca 32´´led smart hd tv modelo rtv32z2sm la falla es que se forma doble imagen solo la mitad de la pantalla (parte de abajo) la t-con es la 32t24-cok ctrl que trae los siguientes circuitos AUO p303-19, AUO11311, i7814hp, AUO s302-1v y AUO g301-1v alguien me podria ayudar. soy de Mexico uso el traductor gracias.
==============================

I have an rca 32´´led smart hd tv model rtv32z2sm the fault is that only half of the screen is formed double image (bottom part) the t-con is the 32t24-cok ctrl that brings the following circuits AUO p303-19 , AUO11311, i7814hp, AUO s302-1v and AUO g301-1v someone could help me. I'm from Mexico, I use the translator, thank you.

Likes(1)Dislikes(0)

By: R Murali

R Murali — Wed, 04 Sep 2019 16:11:54 +0000

In reply to Parasuraman Subramanian.

I do read your contributions and happy to gain knowledge from your technical skills . Here is a link for downloading CM501 Data http://www.datasheetgo.com/cm501-pdf/
For CM601 its www.kynix.com/Detail/204518/CM601.html Hope this will help you. and Thanks to Mr.Jestine Yong for creating this site........ R Murali

Likes(1)Dislikes(0)

By: Parasuraman S

Parasuraman S — Tue, 03 Sep 2019 23:49:45 +0000

In reply to Idicula.

Check the T-con/Scaler Board voltages, like VGH, VGL, VCOM, VDD and AVDD. If these are not normal, check for its supply voltage, usually 12V and its filter caps. If these are all normal, the problem lies in the cof connector and/or panel. That requires expert maneuvering of the X-Y array!

Likes(5)Dislikes(0)

By: Parasuraman S

Parasuraman S — Tue, 03 Sep 2019 15:58:24 +0000

Thanks to all for the links given. I got it for CM501 from a technical group. Can I get the datasheets of CM601 and CM1801B?

Likes(1)Dislikes(1)

By: Idicula

Idicula — Tue, 03 Sep 2019 14:45:15 +0000

Actually this not a comment. A doubt.
I have a Samsung LED TV, Model No. UA32H5500. When switched on some lines are coming vertically or horizontally. Some times up side or down side, left side or right side like that. What are the causes. I am not an expert in LED TV's. Can you help.

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Tue, 03 Sep 2019 05:39:47 +0000

congratulations on a job well done. I had the same issues with Sanui TV and it was the IC that was causing the problem. sad to say even with new IC's bought off the net, there are a lot of them that are defective but we keep trying till we get it right. keep up the good work my friend and have a blessed day

Likes(2)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Mon, 02 Sep 2019 21:29:57 +0000

In reply to Parasuraman Subramanian.

This is probably the pinconfiguration of the CM501 48 pins smd chip:
https://nl.pinterest.com/pin/609534130797967157/
Hope this helps.

Likes(1)Dislikes(0)