Comments on: Basic Electronics Repair Course And Went To Jalan Pasar Electronics Center

By: Parasuraman S

Parasuraman S — Wed, 06 Nov 2019 13:45:35 +0000

Yes, you are right that a soldered joint is best and proper. What is shown there is electrical wiring such as being done in homes and offices. Soldering is not done in such work. The method of joining the wires is the best and it does not form a lump. It goes very well with the diameter of the wire and fits in snugly into its case. Such joints are very firm and reliable.

Likes(0)Dislikes(0)

By: Jestine Yong

Jestine Yong — Mon, 04 Nov 2019 23:39:22 +0000

In reply to Robert Calk Jr..

Hi Robert,

You are welcome.Noted about your video comment.

Jestine

Likes(0)Dislikes(0)

By: Robert Calk Jr.

Robert Calk Jr. — Mon, 04 Nov 2019 17:40:54 +0000

Congratulations! I disagree with the video of the "proper joint of electric wire". I believe that a "soldered joint" is best and proper, after wrapping the wire like the video shows.

Likes(0)Dislikes(0)

By: Jestine Yong

Jestine Yong — Mon, 04 Nov 2019 12:36:45 +0000

In reply to Parasuraman S.

Hi Parasuraman,

Thanks.

Jestine

Likes(0)Dislikes(0)

By: Parasuraman S

Parasuraman S — Mon, 04 Nov 2019 05:57:35 +0000

Congratulations! All the very best!

Likes(0)Dislikes(0)

By: beh

beh — Sun, 03 Nov 2019 14:46:45 +0000

This is the first time someone from china participates in the basic course or at least I donot remember anyway I welcome you all to the world of electrons and electronics
cheers
beh

Likes(1)Dislikes(0)