Comments on: Benq G700AD LCD Monitor Repaired With No Power Symptom https://jestineyong.com/benq-g700ad-lcd-monitor-repaired-with-no-power-symptom/ Semiconductors, Test Equipments, Circuit Board Troubleshooting, Electronic Repair Courses and Many More! Wed, 28 Sep 2022 14:24:27 +0000 hourly 1 https://wordpress.org/?v=5.4.19 By: Nikita https://jestineyong.com/benq-g700ad-lcd-monitor-repaired-with-no-power-symptom/comment-page-1/#comment-396259 Wed, 28 Sep 2022 14:24:27 +0000 https://www.jestineyong.com/?p=5334#comment-396259 If your Benq LCD Monitor is not powering on, there are a few things you can check to try and troubleshoot the issue. First, verify that the power cord is firmly plugged into both the monitor and a working outlet. Next, check to see if the monitor's power button is illuminated. If it is, press the button to see if the monitor will power on. If the power button is not illuminated, make sure the monitor is plugged into a working outlet and that the power cord is not damaged. If the outlet and cord are both in working order, try pressing the power button again. If the monitor still does not power on, it may need to be repaired or replaced.

Likes(0)Dislikes(0)
]]> By: Karan https://jestineyong.com/benq-g700ad-lcd-monitor-repaired-with-no-power-symptom/comment-page-1/#comment-322559 Thu, 28 Sep 2017 04:10:08 +0000 https://www.jestineyong.com/?p=5334#comment-322559 In reply to Karan.

Sorry TOP245

Likes(0)Dislikes(0)
]]> By: Karan https://jestineyong.com/benq-g700ad-lcd-monitor-repaired-with-no-power-symptom/comment-page-1/#comment-322558 Thu, 28 Sep 2017 04:09:12 +0000 https://www.jestineyong.com/?p=5334#comment-322558 Thanks it worked me. Top645.

Likes(0)Dislikes(0)
]]> By: Jestine Yong https://jestineyong.com/benq-g700ad-lcd-monitor-repaired-with-no-power-symptom/comment-page-1/#comment-194778 Sun, 25 Aug 2013 12:22:05 +0000 https://www.jestineyong.com/?p=5334#comment-194778 In reply to Kiran.

H Kiran,

Did you replace with the same crt tube or not because all vertical and horizontal yoke coil has it own value.

Jestine

Likes(0)Dislikes(0)
]]> By: Kiran https://jestineyong.com/benq-g700ad-lcd-monitor-repaired-with-no-power-symptom/comment-page-1/#comment-194761 Sun, 25 Aug 2013 04:54:21 +0000 https://www.jestineyong.com/?p=5334#comment-194761 Hi sir
I have a 21" flat crt tv. Iam handy in repairing works. The vertical and horizontal coil of yoke gets short. So i replace a new yoke and now there is one bright horizontal line on the screen. I replace all capacitors in vertical section even the vertical IC 7840. But horizontal line is not gone. So i replace the chroma IC R2J10172HA-A97FP. when i replace the ic the height of the picture is too much less. I have done factory settings using remote to increase picture size. But still no result. Plz help

Likes(0)Dislikes(0)
]]> By: Narayan https://jestineyong.com/benq-g700ad-lcd-monitor-repaired-with-no-power-symptom/comment-page-1/#comment-194579 Sat, 17 Aug 2013 04:32:48 +0000 https://www.jestineyong.com/?p=5334#comment-194579 In reply to beh.

thank you beh

Likes(0)Dislikes(0)
]]> By: beh https://jestineyong.com/benq-g700ad-lcd-monitor-repaired-with-no-power-symptom/comment-page-1/#comment-194571 Fri, 16 Aug 2013 21:53:37 +0000 https://www.jestineyong.com/?p=5334#comment-194571 HI NARAYAN

thanks for this repair by doing this you one time more helped the resources of the mother earth and not sending this lcd to junkyard and income for family
beh

Likes(0)Dislikes(0)
]]>