Don't Miss

Bought A Used Oscilloscope

By on January 20, 2011

I  bought a used Kenwood 70MHZ analog scope today and it comes with two new x 10 probes. I suppose to buy a 100Mhz but there was no more stock so i took the 70MHZ instead. It was like a new scope and i was informed that it was hardly used. The price was about USD300+ and i bought it for my student to use. The guy who sold me the scope bought a Blue ESR meter kitset from me. He already owned the Peak ESR meter and would like to compare how good the Blue ESR meter is. You may check out his website by clicking HERE. Here are the photos of the scope and you could see that it is like a new scope:

 

scope

 

oscilloscope

 

 oscilloscope

Likes(1)Dislikes(0)

8 Comments

  1. beh

    January 20, 2011 at 9:17 am

    HI JESTINE

    it is just like new scope/ American brand . it is a good deal
    happy scopping
    beh

    Likes(0)Dislikes(0)
  2. admin

    January 20, 2011 at 10:54 am

    HI Beh,

    It was a best buy!

    Jestine

    Likes(0)Dislikes(0)
  3. Ravendra

    January 22, 2011 at 5:48 am

    hi jestine

    this scope looks gud, but do u use any digital scopes with lcd screens. which type is better ?

    ravendra

    Likes(0)Dislikes(0)
  4. Bernard

    January 22, 2011 at 11:51 am

    Hi Jestine,

    Kenwood popular brand, Jestine seems you have a quite a few scopes in your center. which one Jestine will normally use.

    Likes(0)Dislikes(0)
  5. admin

    January 23, 2011 at 10:29 am

    HI Bernard,

    I prefer the 50mhz analog scope but i will try out this 70mhz.

    Jestine

    Likes(0)Dislikes(0)
  6. admin

    January 23, 2011 at 10:37 am

    HI Ravendra,

    Since i do not have the lcd screen scope yet thus i can't give any advice on this-sorry.

    Jestine

    Likes(0)Dislikes(0)
  7. Weazel

    June 25, 2012 at 4:03 am

    i have if memory serves rite the 15 somethink memory scope 25mhz scope much like this with add on memory bank (doesnt work) and came with add on to write on screen (dont have) never could get the manual or serving stuff it was a ok scope needs servicing 
    i have about 10 scopes old 60's valve 1s mostly the 70~80's 1s with the sort after ecc88 valves
    and a 300mhz ex military tek scope 25XX somethink 
    i find the old 1s are way more handy in servicing equipment can handel the higher mains voltage got phillips 1 that can input 400v

    Likes(0)Dislikes(0)
    • Jestine Yong

      June 26, 2012 at 7:56 am

      Hi Weazel,
      Thanks for sharing!

      Jestine

      Likes(0)Dislikes(0)

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close