Comments on: Canon Printer Feeding Blank Sheets Continuously and Paper Jam Error

By: Satish Sathe

Satish Sathe — Thu, 02 Dec 2021 10:26:27 +0000

Thanks for the article.

I tried the same remedy for same problem on my printer, but the problem is not solved after cleaning the black sticky substance.

Please suggest what else should be checked and repaired.

Likes(0)Dislikes(0)

By: Leonard

Leonard — Sat, 14 Aug 2021 11:02:51 +0000

Very nice imformative artcle, i like it

Likes(0)Dislikes(0)

By: Mehdi Morshedloo

Mehdi Morshedloo — Sun, 29 Mar 2020 09:47:14 +0000

Hi thank you for your guide my problem solved

Likes(0)Dislikes(0)

By: John

John — Mon, 17 Jun 2019 05:09:47 +0000

In reply to Parasuraman S.

Thanks for the article, I was able to fix my Canon LBP3000 in Australia by cleaning the solenoid as you describe.

Likes(0)Dislikes(0)

By: Raaj

Raaj — Mon, 06 Nov 2017 10:43:34 +0000

Very helpful article. My printer (same mode) throws blank paper and it does not print. However, the same toner cartridge works fine on a different printer similar model. What could be the problem. Thanks in advance.

Likes(0)Dislikes(0)

By: Suresh Babu Shenoy

Suresh Babu Shenoy — Thu, 07 Sep 2017 00:49:47 +0000

It is very nice of you for presenting this with great clarity. I do have a different issue. The printer is fine. But when I am using A4 paper cut to half size, it takes almost 15 seconds to load each page. The normal A4 do not take that much time to load and print. This takes more than double time if I want to print say 50 pages etc. I use this to make small booklets on poojas etc for distribution among a small gathering of devotees. What could be the problem? can you help

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 30 Jul 2016 08:06:51 +0000

Mr. Tambe,

Try with another working Toner Cartridge if not fixed the probable culprit area is Fuser assembly or Scanner assembly.

Likes(0)Dislikes(0)

By: A G Tambe

A G Tambe — Fri, 29 Jul 2016 08:24:26 +0000

Useful Information. I have a question for Mr Yogesh - When printed on Canon 2900, the middle portion does not get fixed. Fuser, Heating Element has already been replaced. What will be the problem ?

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Fri, 22 Jul 2016 10:08:28 +0000

In reply to Gerald.

Sir,
Thanks for Comment just find comment below.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Fri, 22 Jul 2016 10:07:26 +0000

In reply to bekim.

bekim,

Thanks for comment. failure rate of solenoid is much less then as compare to another parts.

Likes(0)Dislikes(0)