Don't Miss

China Made Comprehensive Digital Multimeter and Oscilloscope

By on May 11, 2010

multifunction scope

This is a five in one Multifunction Oscilloscope and the product description is as below:

50M samples / 10MHz digital Oscilloscope

Analog bandwidth: DC~25MHz  3dB; 20mV/div~5V/div; Max 30MHz;

Three measuring Method in Oscilloscope Mode: Normal/Video/Single

40 Groups of Waveform storage

4000 count auto-ranging digital multimeter/ Max reading is up to 6000 count

Signal output function: Sine wave/Square wave/Triangle wave/Saw-tooth wave output function.

Pressing One-button automatically to display waveform

Digital reading parameters of the waveform out

200 Groups of data storing and reading out

TRMS voltage / current measurements

AC voltage frequency response is up to 50kHz

Resistance measuring range is up to 60MΩ

Frequency/ duty cycle / capacitance / dB measurements

Max/ Min/ relative value measuring reading displayed on one screen

Exact accuracy of the calibration panel

All the functions controlled by buttons, easily use

RS232 interface connected to PC /USB connected to PC (only for New Version)

An external temperature / crystal / clamp measurements


This meter and scope seems like very convenient in our repair bench but then again there is no guarantee on the reliablity of this meter/scope unless someone has tested it out.



  1. benson gitau

    May 28, 2010 at 3:57 am

    kinly give more details about this test equipment, i.e cost and its availablity in the market.

    thanks in advance

  2. admin

    May 28, 2010 at 9:00 am

    HI Benson,

    Here is the link:

    You may need to email them for more info. Becareful of sending the money if you have no confident in that company.


  3. Digital Meters

    August 21, 2010 at 7:36 am

    Another exciting stuff to have,with that multi-function digital meter,you can have accurate reading of capacitance and voltage.It have a great specification features,I will check out this in the market and see the actual device.

  4. raza

    February 14, 2011 at 12:56 am

    what ios the function of a multimeter ni cel lphone motherboard repairing

  5. admin

    February 14, 2011 at 3:58 am

    HI Raza,

    I don't get your question of what is the function of multimeter i cell phone and motherboard repairing. Multimeter is for checking components, continuity and etc.



Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.