Comments on: Circuit Track Problem In B.P.M https://jestineyong.com/circuit-track-problem-in-b-p-m/ Semiconductors, Test Equipments, Circuit Board Troubleshooting, Electronic Repair Courses and Many More! Tue, 09 Feb 2021 04:05:30 +0000 hourly 1 https://wordpress.org/?v=5.4.19 By: Jestine Yong https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-373242 Tue, 09 Feb 2021 04:05:30 +0000 https://www.jestineyong.com/?p=8876#comment-373242 In reply to Usman.

Hi Usman,

I have not came across this problem before and without hands on assessment it is hard for me to tell what would be the actual faulty component. This means you may need to open up the device and start to check and troubleshoot. Electronics failure can be caused by open circuit track, loose cable connection, bad or dirty sensors, faulty components or even corrupted memory ICs.

Jestine

Likes(0)Dislikes(0)
]]> By: Usman https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-373173 Tue, 02 Feb 2021 16:03:12 +0000 https://www.jestineyong.com/?p=8876#comment-373173 I have an ibp A40 blood pressure monitor.. it starts fine and pumps in air and the inflates and then starts inflating and I can hear the bleed valve clicking until the deflates until 20 or 15 and then gives EE error... the thing is.. it shows the pressure of air being pumped in the cuff but it does not sense the heart rate or blood pressure and during deflation it keeps on looking until the pressure becomes zero.. do you know what's wrong with this monitor? There are no leaks..

Likes(0)Dislikes(0)
]]> By: javier loaisiga https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-235463 Sat, 07 Mar 2015 00:09:47 +0000 https://www.jestineyong.com/?p=8876#comment-235463 hi, jestine Yong
Your articles really are excellent

Likes(0)Dislikes(0)
]]> By: Jestine Yong https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-234421 Tue, 27 Jan 2015 23:21:43 +0000 https://www.jestineyong.com/?p=8876#comment-234421 In reply to Aziz.

HI Aziz,

You are welcome.

Jestine

Likes(0)Dislikes(0)
]]> By: Jestine Yong https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-234420 Tue, 27 Jan 2015 23:21:30 +0000 https://www.jestineyong.com/?p=8876#comment-234420 In reply to GIRISh.

HI Girish,

You are welcome.

Jestine

Likes(0)Dislikes(0)
]]> By: Aziz https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-234418 Tue, 27 Jan 2015 21:24:00 +0000 https://www.jestineyong.com/?p=8876#comment-234418 Hello dear Mr.Yong
thank you so much for sharing all of your good knowledge and experiences in repairing electronic devices . I always follow and notice your useful posts and also pray for your health and happiness , you are a nice man , God Bless You
sincerely yours
Aziz

Likes(0)Dislikes(0)
]]> By: GIRISh https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-234412 Tue, 27 Jan 2015 14:37:29 +0000 https://www.jestineyong.com/?p=8876#comment-234412 Nice Article....Photos are Super clear.

Thanks

Likes(0)Dislikes(0)
]]> By: Jestine Yong https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-234314 Sat, 24 Jan 2015 01:29:52 +0000 https://www.jestineyong.com/?p=8876#comment-234314 In reply to Philip P George.

HI Philip,

You are welcome!

Jestine

Likes(0)Dislikes(0)
]]> By: Humberto https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-234306 Fri, 23 Jan 2015 15:45:04 +0000 https://www.jestineyong.com/?p=8876#comment-234306 In reply to admin.

You are right Robert, the batteries of all our equipments and devices should be checked on every certain time. I've seemed this bad situation in many remote controls of TV sets, DVD players, etc.

Likes(0)Dislikes(0)
]]> By: Philip P George https://jestineyong.com/circuit-track-problem-in-b-p-m/comment-page-1/#comment-234305 Fri, 23 Jan 2015 15:31:00 +0000 https://www.jestineyong.com/?p=8876#comment-234305 Very informative article.Thank you very much Mr Jestine Yong.

Likes(0)Dislikes(0)
]]>