Don't Miss

COMPAQ w185q LCD Monitor Blank Screen Repaired

By on January 18, 2017
lvd-cable-bad-repair

 

 

 

 

 

 

 

 

 

 

Received one LCD Monitor to my workshop, Compaq Model: w185q described fault symptom is monitor shows “Blank white Screen” when power “ON.”




After taking this monitor to put on my workbench for testing, after turning the Power ON of the Monitor there is a blank white screen and no “OSD” on the screen.

lcd-monitor-blank-screen-repair

This type of Blank white screen without “OSD” indicates problem with Logic Board LVDS section. Hence opened the monitor for further testing and started visual inspection.

lcd-monitor-repair

I have removed the Whole Cable and found whole cable in horrible condition.

bad-cable-lcd-monitor

Further I have checked LVDS Socket and found Bad solder on some of the pins on socket.

repair-lvds-cable

Now this is to time for order a new LVDS Cable. Till the Cable is arranged I have to refresh the solder on the LVDS Socket.

lvds-socket-problem

Till the time I have checked the Logic PCB everything seems to be ok as no physical damage found.

lvd-cable-bad

Now received New LVDS Cable

lcd-monitor-lvds-cable

So attached new cable and powered the monitor for result. Yes Monitor is back to the life but here I found one vertical Pink line on left side of the screen corner.

lcd-monitor-fix

So I called up the customer and described the work progress to him. And also I discussed about suspect the panel itself bad for the vertical line that time he told me that he is using the monitor in this condition since last 2 Years & He was on hurry to take back the monitor.

So I have returned the Monitor to him in this condition.

yogesh

This article was prepared for you by Yogesh Panchal who works as a Computer Hardware Engineer in Mumbai India.




Please give a support by clicking on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments.

P.S- Do you know of any your friends who would benefit from this content that you are reading now? If so, forward this website to your friends or you can invite your friends to subscribe to my newsletter for free in this Link.

Note: You can check his previous repair articles in the link below:

https://jestineyong.com/hp-laser-jet-1020-plus-printing-image-problem-solved/

 

Likes(117)Dislikes(0)

22 Comments

  1. Luciano Khware

    January 18, 2017 at 8:29 pm

    Hi Yogesh,
    Short, precise and up to the point. Thanks

    Likes(0)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 3:57 pm

      Luciano,
      thanks for the comment.

      Likes(0)Dislikes(0)
  2. PARASURAMAN S

    January 18, 2017 at 8:36 pm

    Great! Well done!

    Likes(0)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 3:57 pm

      Thank you sir.

      Likes(0)Dislikes(0)
    • Manan Sharma

      October 19, 2020 at 3:15 pm

      Hello Sir,

      I have the same Monitor and having the same problem of white screen, my LVDS cable was also in bad condition, but I'm not able to find a new cable, please help with the link where i can buy it.

      Likes(0)Dislikes(0)
  3. Paris Azis

    January 18, 2017 at 9:46 pm

    Good job, Yogesh.

    Likes(0)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 3:58 pm

      Thanks Paris.

      Likes(0)Dislikes(0)
  4. Andre Gopee

    January 18, 2017 at 10:17 pm

    Nice repair article. Thanks for sharing.

    Likes(0)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 3:59 pm

      Andre,

      Thanks for the comment.

      Likes(0)Dislikes(0)
  5. Tito Kanshulu

    January 18, 2017 at 10:21 pm

    Good work Yogesh. The problem has been well tackled.

    Likes(0)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 4:00 pm

      Tito,

      Thanks for comment.

      Likes(0)Dislikes(0)
  6. Robert Calk

    January 19, 2017 at 1:02 am

    Good job, Yogesh. That is the worst LVDS cable I have ever seen.

    Likes(0)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 4:01 pm

      Sir,

      thanks for your feedback.

      Likes(0)Dislikes(0)
  7. Albert van Bemmelen

    January 19, 2017 at 2:09 am

    Good repair Yogesh. Replacement of such delicate parts is always the best way to proceed. And like broken Hinges these parts luckily are often available. I guess you also have tried to remove the vertical line by applying some pressure on the top and bottom connections to the LCD?

    Likes(1)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 4:05 pm

      Albert,

      i have tried the same thing but no success for vertical line and customer is in so hurry so i could not do more.
      thanks for your feed back.

      Likes(0)Dislikes(0)
  8. Mark

    January 19, 2017 at 6:30 am

    Well done Yogesh,
    It's great to have repairs that are simple, it makes our life so much easier. Components as well as wiring wears over time as you have shown. Good to see it up and running again.

    Likes(0)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 4:06 pm

      Mark,

      thanks for your feed back.

      Likes(0)Dislikes(0)
  9. angelo

    January 20, 2017 at 8:21 am

    Thanx easy n simple
    Keep it up

    Likes(0)Dislikes(0)
    • Yogesh Panchal

      January 21, 2017 at 4:07 pm

      Angelo,

      Thanks for comment.

      Likes(0)Dislikes(0)
  10. Humberto

    January 23, 2017 at 11:47 pm

    Great job Yogesh. What a bad condition the cable!

    Likes(0)Dislikes(0)
  11. Humberto

    January 24, 2017 at 12:16 am

    Great job
    What a spoiled LVDS cable!

    Likes(0)Dislikes(0)
  12. Ulises Aguilar Pazzani

    October 26, 2017 at 10:13 am

    Grate fix Mr Panchal , always readying Your repairs

    Likes(0)Dislikes(0)

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close