Don't Miss

Completed The Advanced Electronics Repair Course

By on October 24, 2018
kursus teknical elektronik

 

 

 

 

 

 

 

 

 

 

 

Just completed another Advanced Electronics Repair course for 5 participants. Two of them were from Maldives. One of the participants (retiree) that took the Basic course last week will take the Higher Advanced Repair course tomorrow. Below are the photos and a video taken during the three days course:

 

technical course in electronics

power supply course

electronics repair course

how to read schematic course

power supply repair courses

smd rework soldering course

oscilloscope course

how to use scope

how to test power supply

graduates in electronics

Likes(16)Dislikes(0)

16 Comments

  1. Parasuraman S

    October 24, 2018 at 10:24 pm

    Well done! Welcome aboard to the new technicians!

    Likes(0)Dislikes(0)
    • Jestine Yong

      October 25, 2018 at 7:55 am

      Hi Parasuraman,

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  2. Albert van Bemmelen

    October 25, 2018 at 2:24 am

    The short 22 seconds video on how to read schematic diagrams shows how silent all guys were while reading those diagrams. You probably could hear a needle drop at the Noahtech centre which shows their professional commitment.

    Congratulations to all Advanced Electronics Repair course participants!

    Likes(1)Dislikes(0)
    • Jestine Yong

      October 25, 2018 at 7:54 am

      Hi Albert,

      Thanks. I have given to them an assignment and they need to focus on the schematic diagram.

      Jestine

      Likes(1)Dislikes(0)
  3. Mark Kalembelembe

    October 25, 2018 at 2:53 am

    Am happy with your empowerment policy as you improve the lives of people.
    My humble request is if you can consider on line training for those of us who cannot manage to be physically in class.
    Mark.

    Likes(0)Dislikes(0)
    • Jestine Yong

      October 25, 2018 at 7:58 am

      Hi Mark,

      Since this is a 85 to 90% hands on practical course,it can't be conducted online. I want the students to see, touch, feel the components, use the meters and tools and hold the problematic circuit boards and it can't be taught online this way-sorry.

      Jestine

      Likes(1)Dislikes(0)
  4. Robert Calk Jr.

    October 25, 2018 at 5:58 am

    Congratulations!

    Likes(0)Dislikes(0)
    • Jestine Yong

      October 25, 2018 at 7:53 am

      Hi Robert,

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  5. beh

    October 25, 2018 at 3:43 pm

    Congratulations .

    Likes(0)Dislikes(0)
    • Jestine Yong

      October 25, 2018 at 3:56 pm

      Hi Beh,

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  6. Jayant Mohapatra

    October 28, 2018 at 1:43 pm

    In which city the course is offered in India

    Likes(0)Dislikes(0)
    • Jestine Yong

      October 28, 2018 at 8:01 pm

      Hi Jayant,
      We only conduct the course in Malaysia

      Jestine

      Likes(0)Dislikes(0)
  7. Tyrone Arendse

    October 31, 2018 at 12:53 am

    Congratulations it's a pity that I live so far

    Likes(0)Dislikes(0)
    • Jestine Yong

      October 31, 2018 at 9:31 am

      Hi Tyrone,

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  8. Humberto

    November 7, 2018 at 12:56 am

    Congratulations to everybody.

    Likes(0)Dislikes(0)
    • Jestine Yong

      November 7, 2018 at 10:49 am

      Hi Humberto,

      Thanks.

      Jestine

      Likes(0)Dislikes(0)

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close