Comments on: Control Board Of LG Washing Machine Restored

By: Parasuraman S

Parasuraman S — Sat, 01 Mar 2025 23:34:07 +0000

In reply to Mark J.

Many thanks, dear Mark!

Likes(1)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sat, 01 Mar 2025 23:33:41 +0000

In reply to YOGESH PANCHAL.

Many thanks for your analytical comments, dear Yogesh Bai!

Likes(1)Dislikes(0)

By: Mark J

Mark J — Sat, 01 Mar 2025 20:34:30 +0000

Parasuraman thanks for sharing.

Likes(2)Dislikes(0)

By: YOGESH PANCHAL

YOGESH PANCHAL — Sat, 01 Mar 2025 14:54:12 +0000

Good Job!Sir,
Waterproofing on the PCB is must for this device & Technicians who work on washing machines are used to for the process of cutting the PCB Unit from the Backside (Not from the sealant side) to reach the solder Joints & also these PCB required different loads Sensors for testing.
You made the right decision in hiring an expert to get the job done.

Likes(3)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sat, 01 Mar 2025 12:58:11 +0000

In reply to albert van bemmelen.

Here, we have facilities for metal and fibre patching. I have done it in my car also. Many technicians get such patch work done locally for costly refrigerators, washing machines and aircondioners. Many thanks for your comments, dear Albert!

Likes(4)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sat, 01 Mar 2025 12:49:44 +0000

In reply to Waleed Rishmawi.

Yes, dear the silicone coating is a real pain! Many thanks!

Likes(4)Dislikes(0)

By: albert van bemmelen

albert van bemmelen — Sat, 01 Mar 2025 10:56:59 +0000

Only those very experienced engineers that deal on a daily base with such special brand of machines are capable to master and fix these repairs that often involve multiple causes of malfunction. These repairs also require special made test tools to cope with the many differences in design that exist.
Sadly even when a washing machine is completely working with no defects on control board or motor or other electronic part, it still may mean the end of life for the machine. Like when my washing machine sadly had gotten an internal leakage causing a low current flow between the earth wire shorting to the heater element. That often caused my earth powerfuse protector cutting the powerline which couldn't be fixed because of the rust on the exposed internal metal housing.

Likes(5)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Sat, 01 Mar 2025 10:27:43 +0000

thanks for sharing. yes I relay hate the silicon coating they cover the board with, I know it is for a good reason but that does not help to do any kind of repair on. I am glad it worked out. thanks for sharing and have a blessed day

Likes(5)Dislikes(0)