Comments on: Doubt About Using ESR Meter https://jestineyong.com/doubt-about-using-esr-meter/ Semiconductors, Test Equipments, Circuit Board Troubleshooting, Electronic Repair Courses and Many More! Thu, 21 May 2009 14:07:02 +0000 hourly 1 https://wordpress.org/?v=5.4.25 By: admin https://jestineyong.com/doubt-about-using-esr-meter/comment-page-1/#comment-2688 Thu, 21 May 2009 14:07:02 +0000 https://www.jestineyong.com/?p=2080#comment-2688 Hi John,

Without one seems like no confident in finding out bad caps!

Jestine

Likes(0)Dislikes(0)
]]> By: john preher https://jestineyong.com/doubt-about-using-esr-meter/comment-page-1/#comment-2687 Thu, 21 May 2009 04:49:39 +0000 https://www.jestineyong.com/?p=2080#comment-2687 I love my ESR meter it is one of my most used tools!!I can't imagine trying to repair TVs with out it....

Likes(0)Dislikes(0)
]]> By: admin https://jestineyong.com/doubt-about-using-esr-meter/comment-page-1/#comment-2686 Thu, 21 May 2009 00:42:26 +0000 https://www.jestineyong.com/?p=2080#comment-2686 Thanks Andi!

Jestine

Likes(0)Dislikes(0)
]]> By: Andi Sapli https://jestineyong.com/doubt-about-using-esr-meter/comment-page-1/#comment-2685 Wed, 20 May 2009 22:48:03 +0000 https://www.jestineyong.com/?p=2080#comment-2685 It's true what Jestine Yong said, when you get use in using ESR meter you will in blind corner when you dont have one. In my case I repair a T14" Toshiba CRT Television with a horizontal line at upper top of the screen.There's two ecaps with 2.2uf 50V value and its good when check with normal capacitance meter and have to desolder from the board. But when check with ESR meter it shows high esr , replace this 2 ecaps solve the problem.For those without one better order one from Jesting.

Thanks

ndsap

Likes(0)Dislikes(0)
]]>