Comments on: How To Find Shorted Components In LCD TV

By: beh

beh — Thu, 19 Jan 2012 03:10:25 +0000

HI JESTIN
thanks
beh

Likes(0)Dislikes(0)

By: admin

admin — Wed, 18 Jan 2012 23:23:30 +0000

HI Beh,

Yes.

Jestine

Likes(0)Dislikes(0)

By: beh

beh — Wed, 18 Jan 2012 04:21:53 +0000

HI MR YONG
is he hooked the negative side of 12 volt battery to the ground of the circuite?
beh

Likes(0)Dislikes(0)

By: admin

admin — Tue, 17 Jan 2012 11:44:18 +0000

Hi Beh,

He solder only one wire instead of the whole wires and he solder it to act as a fuse. Infact he soldered it at the other side of the fuse and not the incoming voltage side.

Jestine

Likes(0)Dislikes(0)

By: beh

beh — Sun, 15 Jan 2012 15:15:25 +0000

HI JESTINE

He soldered the wire to the positive side of fuse? and why?
thanks
beh

Likes(0)Dislikes(0)

By: admin

admin — Thu, 12 Jan 2012 12:10:22 +0000

HI David,

Try this link:

http://www.repairfaq.org/samnew/tvfaq.htm

Jestine

Likes(0)Dislikes(0)

By: David Saidi

David Saidi — Tue, 10 Jan 2012 21:27:59 +0000

Thank you for repairing tip. I would like to know more on power switch mode on colour Tv/power supply unity their type s & the chopper transformer how it work and made (wire )winding.

Likes(0)Dislikes(0)

By: beh

beh — Mon, 09 Jan 2012 14:29:03 +0000

HI MR YONG

i must said the shorted component are getting hot. i think your answer would be yes.
beh

Likes(0)Dislikes(0)

By: admin

admin — Mon, 09 Jan 2012 12:04:36 +0000

HI Beh,

Only the one that have problem will become hot.

Jestine

Likes(0)Dislikes(0)

By: beh

beh — Mon, 09 Jan 2012 09:07:02 +0000

HI MR YONG
are all the short components getting hot in the circuite ?
thanx
beh

Likes(0)Dislikes(0)