Don't Miss

Fungus Attack And Inverter IC Failure Found In LG 32″ LCD TV

By on January 21, 2019
repairing lg lcd tv












lcd tv repair

This LCD TV was brought to me by a personally unknown customer (another one from the mouth to mouth publicity) with the complaint that the sound was ok, but no display with a dark screen. As he had brought it to my home when I was on my duty at the Hospital, my wife contacted me over phone seeking permission to accept it or not. After speaking with the guys who brought the TV, I decided to accept it and told them to write the name and telephone number on the backside. As a precaution, I never accept any sets from unknown people, and never usually allow my wife to deal with them. First of all, we need to know the fault as described by them face to face and secondly, we have to switch on the set (wherever possible) in front of them, apart from the visual inspection for any damages. This screening and filtering has brought in only very genuine and decent customers to me so far.

I switched on the TV on my return from the hospital and saw that the complaint reported was genuine. I opened the set and cleaned it thoroughly. When I spoke to the customer, I also learnt that the set was not taken to someone else. That was true, as there was a lot of dust even inside the screw holes. Dismantled the boards and brought it to my work table, as my table was not having enough space to keep the panel flat on it. On visual inspection, I found moisture and fungus at several places on the Power Supply Board and also bad solder joints:

how to fix lcd tv

how to repair lcd tv

bad optoisolator ic

how to fix and repair lcd tv

Did a thorough cleaning of the PCB and patched up all dry solders, by retouching the board from one end to the other. Just have a look, how the PCB was after cleaning and retouch:

fixing lcd tv lg

After ensuring that all the voltage outputs are ok, I reconnected the power supply to the board and switched on. But the complaint remained same. Observed that the backlight was not lighting up. On checking the inverter board, which was separate in this TV, it was getting the 24V B+ and 4.65 V on/off , indicating that all was well up to that point.

I removed the cover of the inverter PCB to check what IC was used and whether it was getting the B+ on its pin. It was OZ9966SN SMD IC. You can have a look at the board and the components:

repairing lg lcd tv

lcd tv mainboard repair

lcd tv repair course

The last picture marked as LED1 is an indicator, which lights up if the inverter is functioning. This was in off position when I checked up, though the IC was getting the voltages, indicating every possibility of a defective IC. I got the replacement for the IC OZ9966SN, and my techie friend helped me resolder it properly. Another techie friend suggested a method to check the inverter board using a 15W incandescent lamp. The steps are (1) Supply 24V to the pin marked at the input. (2) Tap 3.9V from it using a 10K drop resistor and 3.9V Zener. (3) Connect this to the on/off point. (4) Use a 10K resistor to pin 15 of the IC to deactivate protection. So I made the temporary connections of these on the board and applied 24V from an Adaptor. The bulb lit properly, and the LED on the board was also lit, indicating that the inverter board was working. Just see the snaps:

lcd tv motherboard repair

lcd tv motherboard fix

troubleshooting lcd tv

I am providing readings of normal voltages on the inverter board: The three readings given in bracket are (1) Standby (2) ON (When inverter IC was defective) and (3) when backlight was functioning:

Status (0.6, 0.6, 0), VBR-B (0, 0.79, 0.79), On/Off (0, 4.67, 4.67), VBR-A (3.35, 1.6, 1.6), Ground 2 & 1 (0, 0, 0), VBL 2 & VBL1 (0, 24.65, 24.39)

Dismantled the components and connected the board directly to the TV. The backlight was on this time and the LED on the board remained on for a few seconds and then went off, probably that’s how it should function. The remote control was defective and after I opened it and cleaned it well, it started working well. The problem now was no display. Checked the voltages on the Tcon Board and found it to be 0. Checked all outputs from the SMPS at the input to the main board and found 12V missing. So, disconnected and dismantled the boards and removed the SMPS board again and checked what went wrong. After combing the area several times and a minute scrutiny of the 12V path, I could see a drop of solder that had got stuck between two pins of an SMD transistor. Removed it and checked whether the transistor had failed. It was found to be good. Connected the board and tried and this time the display was on. Fed a Video and checked and found the result was too good! Just for your information, I am also giving the snap of the main board along with the picture of the result:

lg lcd tv motherboard repair

lg lcd tv motherboard repair and fix

Sorry, I forgot to click a few more snaps of other stages explained.

Another job completed fully satisfactorily, and got attracted to the bulging bag!

This article was prepared for you by Parasuraman Subramanian from India. He is 69 years old and has more than 30 years’ experience in handling antique equipment like Valve Radio, Amps, Reel Tape Recorders and currently studying latest tech-classes conducted by Kerala State Electronics Technicians’ Association. He has done graduation in BBA degree, private diploma in Radio Engineering and retired as MD of a USA company. Presently working as Consultant to Hospital and other institutions.

Please give a support by clicking  on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments.

P.S-If you enjoyed reading this, click here to subscribe to my blog (free subscription). That way, you’ll never miss a post. You can also forward this website link to your friends and colleagues-thanks!

You may check on his previous repair article below:




  1. Waleed Rishmawi

    January 21, 2019 at 2:27 pm

    a repair well done my friend. thanks for sharing. have a blessed day

  2. Muiddin

    January 21, 2019 at 3:24 pm

    Great job
    Thank you sir

  3. Albert van Bemmelen

    January 21, 2019 at 3:41 pm

    Many other engineers would have given up right after you had fixed the Backlight Inverter and the TV still refused to function properly! Thanks for the well detailed information on testing that Inverter Board! Good to know that a Lightbulb, the 15W incandescent lamp here, is still the easiest way to keep a load, even on the HV output of this Inverter, to keep it running.

  4. Robert Calk Jr.

    January 21, 2019 at 6:29 pm

    Nice repair, Parasuraman. Thanks for sharing it with us.

  5. beh

    January 21, 2019 at 9:09 pm

    fungus is a common problem in humid region in electronic machines. thanks for sharing your experience .

  6. Mark

    January 22, 2019 at 11:23 am

    Job well done!

  7. asif

    January 22, 2019 at 10:54 pm

    your articles are very good and useful. please write articles from basic so that beginners can able to repair a lcd.!!!
    thank you

    • Parasuraman S

      January 25, 2019 at 10:01 am

      Please buy books published by Jestine Yong and learn.

  8. moshe

    January 26, 2019 at 11:20 am

    You offer a great tip with the lightbulb.
    thank you for te article.

  9. Humberto

    January 28, 2019 at 5:20 am

    Great repair and explanations. Congrats.

  10. S Ramachandran

    February 2, 2019 at 7:30 pm

    Good explanation and method of solving... It is very difficult to locate a man made fault..
    All the very best to you sir

  11. Christian

    September 11, 2022 at 7:17 am

    How many voltages is 15W lamp ?

  12. Muthu P

    September 23, 2023 at 9:59 pm

    Fantastic explanation...


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.