Comments on: Heater Element Problem In S993A Vacuum Desoldering Gun

By: Jestine Yong

Jestine Yong — Wed, 03 Oct 2018 09:51:31 +0000

In reply to Robert Calk Jr..

Hi Robert,

Good to know that.

Jestine

Likes(0)Dislikes(0)

By: Robert Calk Jr.

Robert Calk Jr. — Wed, 03 Oct 2018 07:07:06 +0000

In reply to Jestine Yong.

My Hakko 808 also has the pump in the back of the gun.

Likes(0)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Tue, 02 Oct 2018 06:25:12 +0000

In reply to Jestine Yong.

Thanks for confirming Jestine!

Likes(0)Dislikes(0)

By: Jestine Yong

Jestine Yong — Tue, 02 Oct 2018 05:28:47 +0000

In reply to Albert van Bemmelen.

Hi Albert,

I'm using a S-998P Model with a built in pump at the back.

Jestine

Likes(1)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Mon, 01 Oct 2018 17:03:17 +0000

In reply to albert van bemmelen.

By-the-way: I believe that Jestine used another slightly bigger model desolder gun at the Noahtech center. It looks like my S-993A but probably has a larger pump that works even better. And maybe that one is also more robust. And likely also slightly more expensive too. I forgot what model it was.

Likes(0)Dislikes(0)

By: albert van bemmelen

albert van bemmelen — Mon, 01 Oct 2018 12:58:10 +0000

In reply to Justice (City of Durban --South Africa).

Glad you think so Justice! I hope the desolder gun will be a fine new tool, saving you time when a lot of parts need replacements.

Likes(1)Dislikes(0)

By: albert van bemmelen

albert van bemmelen — Mon, 01 Oct 2018 12:44:50 +0000

In reply to Devon Wilson.

I hope it will come to good use if needed Devon. Thanks.

Likes(0)Dislikes(0)

By: Justice (City of Durban --South Africa)

Justice (City of Durban --South Africa) — Mon, 01 Oct 2018 05:18:21 +0000

I am definately going to include this tool to my tools. Wow why did I not know about it and yet its just an obvious needed tool! Thanks Albert wow.

Likes(0)Dislikes(0)

By: Devon Wilson

Devon Wilson — Mon, 01 Oct 2018 00:13:57 +0000

Thanks Albert for your invaluable contribution.

Likes(0)Dislikes(0)

By: Robert Calk Jr.

Robert Calk Jr. — Sun, 30 Sep 2018 02:32:08 +0000

In reply to Albert van Bemmelen.

I have the Tek 2465A DV. Since my scope has the DMM, T/V, GPIB, and C/T/T options in it, the scope uses the Siemens Hall-Effect fan motor. People just say things all the time on the Net without thinking I guess.

Likes(1)Dislikes(0)