Don't Miss


How To Put The Screws Back After Repairing Tablet PC

By on November 3, 2012

In order to open up a tablet PC one need to remove all the screws located at the external cover. Not only that you need to remove screws located under the cover. Having so many screws will confuse you especially when you want to assemble it back. Arjunaidi share a good tip by using an A4 paper to tape the screws so that one can put them back in correct position and also not losing the screws. You can use this method when repairing other electronic devices. Check out the photos below:

 
repair tablet
 
tablet repair
 
 
 
Likes(6)Dislikes(0)

12 Comments

  1. beh

    November 3, 2012 at 12:20 pm

    HI MR YONG
    thanks for good tips
    beh
     

    Likes(1)Dislikes(0)
  2. Arjunaidi

    November 3, 2012 at 8:53 pm

    There is a commercial product called Magnetic Project Matt that does the same job.  My solution using an A4 paper is a cheap or free alternative.   
    http://www.ifixit.com/Tools/Magnetic-Project-Mat/IF145-167

    Likes(2)Dislikes(0)
    • Amir Mukhtar

      April 14, 2014 at 12:29 am

      Thanks you with Great Wishes.
      However, I will check your link website .

      thanks you
      Amir Mukhtar AShrafi

      Likes(0)Dislikes(0)
  3. shehab kably

    November 4, 2012 at 6:03 am

     
    do you heard about microsoft surface tablet you can run the new MS OS windows 8 pro on it .
    but the question is Does this mean the end of PCs . i am wondering

    Likes(0)Dislikes(0)
    • Jestine Yong

      November 5, 2012 at 9:21 pm

      Hi Shehab,

      No I haven't heard of it but that is a great feature. I don't think tablet can replace the function of desktop pc. Tablet is for convenience and not for heavy duty work. For example, at my age I like to look at bigger screen which tablet can't provide. Next I need a real keyboard to provide the speed in supporting my customers. Keyboard in the tablet screen is a nightmare when you type a lot. When you are designing thing or writing in words desktop is still the preferred choice.

      Jestine

      Likes(1)Dislikes(0)
  4. Roberto S.

    November 4, 2012 at 10:55 am

    Good method!

    Likes(0)Dislikes(0)
    • Jestine Yong

      November 5, 2012 at 9:28 pm

      Hi Roberto,

      Yes good method. Human tends to forget easily-with this method we are guaranteed to be able to fix all the screws back.

      Jestine

      Likes(0)Dislikes(0)
  5. Waleed Rishmawi

    November 6, 2012 at 1:56 pm

    yes indeed, a very good method but if you were busy doing a lot of repair in the shop, that would be time consuming..it would take to much time to do it. I usually take a picture of it before a open the device and once i open it, I take another picture of inside screws..always helped. I use an iphone camera. i do the same thing with wiring especially when I have to disconnect more than two cables in the machine..
     

    Likes(0)Dislikes(0)
    • Jestine Yong

      November 6, 2012 at 9:21 pm

      Hi Waleed,

      That was a good method too.

      Jestine

      Likes(0)Dislikes(0)
  6. Gremloyd

    February 24, 2014 at 3:33 pm

    Gud Day Sir. Jestine,

    Am glad to come back.. i need my assistant in android tablet?,my concern is how to extract a image backup or backup.ab in android tablet. I hope you give me a hint, how to do that if you have a extra knowledge in android Tablet..Advance Thank You sir...

    Likes(0)Dislikes(0)
    • Jestine Yong

      February 24, 2014 at 7:26 pm

      HI Gremloyd,

      Sorry I do not have info on this.

      Jestine

      Likes(0)Dislikes(0)
  7. Amir Mukhtar

    April 14, 2014 at 12:27 am

    Thanks you Mr. Arjunaidi for Great and Nice Tip Sharing to save the Screws and Put them back in proper positions.

    Good Job

    Regards
    Amir Mukhtar Ashrfi

    Likes(0)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Free Report