How To Reprogramming 93c56
How to reprogramming 93c56 eeprom ic is not difficult. What you need is a eeprom programmer and the master copy of the software. If you knew that this particular model of equipment the eeprom always have problem then you should keep the original copy. That’s mean if the particular equipment came in with no power symptom and you have solved the problem you then can remove the eeprom and save the copy of the software in the harddisk through eeprom programmer.
Whenever you want to reprogram an IC, you just need the original copy of the software to overwrite the faulty eeprom IC and it will work as new. Very rare the eeprom IC itself have problem usually only the program run and you just have to reprogram it. In LiKOM Monitor, whenever the eeprom have problem, the front panel all the LED’s will run from left to right and right to left. It’s a common fault and reprogramming solved the problem. Remember, eeprom data loss could happen to any kind of electronic equipment that uses the eeprom IC.