Comments on: HP2015dn duplex laser Printer Repaired

By: Yogesh Panchal

Yogesh Panchal — Mon, 11 Mar 2024 15:03:44 +0000

AdamS,
Thanks! for your comment, fiberglass pencil not used yet May be it works good if used in one direction.too much rubbing may make the job worst.still depends on your comfort.

Likes(0)Dislikes(0)

By: AdamS

AdamS — Mon, 11 Mar 2024 11:33:38 +0000

Good job Yogesh! I completely agree about the top to bottom direction - this is very important. However, have you tried a fibreglass pencil for cleaning contacts like this? I only found out about the existence of such a thing recently and it has revolutionised my contact cleaning!

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 09 Mar 2024 16:00:09 +0000

Thanks! Albert,
it need careful hand to handle the FFC Cable.

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 09 Mar 2024 15:58:16 +0000

In reply to Arunkant L Pandit.

your welcome! Arunkant L Pandit

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 09 Mar 2024 15:57:15 +0000

In reply to Anthony Paterson.

Thanks! Anthony Paterson,
Try to avoid using eraser on FFC Cables, lightly scratch it with Blade is good approach,Because when using eraser it will grab surrounding pins also,on pressure it will disturb the pins comes in contact.

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 09 Mar 2024 15:47:46 +0000

In reply to Parasuraman S.

Thank you! Sir
Every printers have different locking & opening procedure,Mostly we never perform any of this type of operation at customer place if we are not confident or familiar.
Because if customer notice that you are struggling for opening the case it is very difficult to convince the customer for Repair cost.While opening sometime it makes loud tick Noise when releasing the plastic locking & customer is damn sure that you have broken something.

Likes(2)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 09 Mar 2024 15:47:18 +0000

In reply to Anthony Paterson.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 09 Mar 2024 15:38:12 +0000

In reply to Waleed Rishmawi.

Thanks! Waleed

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 09 Mar 2024 15:37:47 +0000

In reply to Tayo.

Thanks! for the tip, Tayo

Likes(0)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Sat, 09 Mar 2024 10:02:48 +0000

I never used any rubber eraser successfully although some engineers wrote about the good job they did with it. Glad that you could fix those problematic FFC cables without breaking them.

Likes(2)Dislikes(0)