Comments on: Logitech Keyboard Repaired For Not Responding

By: Anwar Shiekh

Anwar Shiekh — Wed, 16 Mar 2022 02:58:01 +0000

I tend to put silicone oil on contacts as this discourages future corrosion.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 26 Feb 2022 14:33:31 +0000

Gary Gemmell,
You will never get disappointed on this blog,rather Every day we learn something new from articles of our colleagues & professionals.
Thanks!

Likes(0)Dislikes(0)

By: Gary Gemmell

Gary Gemmell — Sat, 26 Feb 2022 00:02:48 +0000

I fix everything too - always look forward to your posts Yogi you do go the EXTRA mile!
>;O)

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 24 Feb 2022 09:11:08 +0000

Lynn Blakely,
"First I cleaned both the contacts using “IPA” (Do Not use eraser)wipe it with lint free cotton cloth then revived contacts by rubbing Pencil Tip on Trace because pencil tip is made of Carbon & Carbon is a electric conductor.Never use acetone on any type of plastic or chances are high that plastic will melt down or get damage.

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 24 Feb 2022 08:30:37 +0000

In reply to Albert van Bemmelen.

Albert,
I will try silverglue see if it works.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 24 Feb 2022 08:28:09 +0000

In reply to Mark.

Mark,
Around 35% repair work are because of Poor Connections.
your welcome.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 24 Feb 2022 08:26:22 +0000

In reply to Waleed Rishmawi.

you are Right waleed, Thanks!.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 24 Feb 2022 08:25:30 +0000

In reply to Parasuraman S.

Thank you! Sir

Likes(0)Dislikes(0)

By: Lynn Blakely

Lynn Blakely — Wed, 23 Feb 2022 16:56:21 +0000

Dear Yogesh: Very good repair. to clean the contacts you used a pencil, did you mean eraser? IPA is always safe, I have used erasers to clean foil, and acetone to clean VCR heads using the the acetone on paper holding the whetted paper against the drum that spins, then turning the head without moving the paper. This was done on stubborn heads that IPA didn't work.The drum would always look like chrome.

Likes(0)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Wed, 23 Feb 2022 11:12:14 +0000

In cases like these I always would try to use silverglue if the foil tracks are damaged. And even if the silverglue in the small container bottle has dried out and got hardened it can be made fluid again easily with a bit of added acetone.

Likes(4)Dislikes(0)