Comments on: Motherboard ASRock came back to life

By: Humberto

Humberto — Tue, 03 Mar 2015 14:24:36 +0000

In reply to Florin.

Ok Florin, UR right. Thanks

Likes(1)Dislikes(0)

By: Humberto

Humberto — Tue, 17 Feb 2015 13:08:32 +0000

In reply to tana.

Well, I remove these e-caps with a soldering iron of 40 watts. For connect the new ones you have to clean the holes in the Motherboard, I use a steel wire (the tin does not fix on it), and then introduce the pins of the capacitor and weld it with fresh tin.

Note: I recommend to test the ESR of the new caps with the Blue ESR Meter or similar

Likes(0)Dislikes(0)

By: Humberto

Humberto — Mon, 16 Feb 2015 14:51:30 +0000

In reply to mobydick.

Well mobydick, I think is not too difficult to get some similar e-caps.

Likes(0)Dislikes(0)

By: Humberto

Humberto — Mon, 16 Feb 2015 14:48:50 +0000

In reply to Corriete.

Thanks Corriete, you are 100% right

Likes(1)Dislikes(0)

By: Humberto

Humberto — Mon, 16 Feb 2015 14:47:34 +0000

In reply to Andre Gopee.

Ok, you are right Andre Gopee

Likes(1)Dislikes(0)

By: Humberto

Humberto — Mon, 16 Feb 2015 14:45:23 +0000

In reply to Peter.

Well Peter, I use to check on all the e-caps with the Blue ESR Meter, then I only change those which have high ESR.

Likes(1)Dislikes(0)

By: Humberto

Humberto — Mon, 16 Feb 2015 14:43:33 +0000

In reply to Robert Calk.

Thanks Robert.

Likes(1)Dislikes(0)

By: Humberto

Humberto — Mon, 16 Feb 2015 14:41:41 +0000

In reply to Yogesh Panchal.

Thanks Yogesh

Likes(0)Dislikes(0)

By: tana

tana — Mon, 16 Feb 2015 14:04:08 +0000

Thanks,Humberto,I have a motherboard with a few capacitors bulging and waiting for repairs .Please tell me how you go about removing it. I am not good at it .

Thank you,
Tana.

Likes(0)Dislikes(0)

By: mobydick

mobydick — Sun, 15 Feb 2015 08:10:45 +0000

hard to find a similar type capacitor

Likes(1)Dislikes(0)