Comments on: Motherboard HP-COMPAQ Repaired

By: stephen ngechu

stephen ngechu — Mon, 01 Jun 2015 20:01:13 +0000

hello sir, it's a well come development. you've make a common man to grow in electronic repair worldwide with yours useful information on elctronic repairs. sir, keep it on. I appreciat. Thanks

Likes(0)Dislikes(0)

By: Robert Calk

Robert Calk — Fri, 15 May 2015 07:44:42 +0000

In reply to Humberto.

Even after 2 months I would still like to see the article...

Likes(1)Dislikes(0)

By: masoud

masoud — Thu, 14 May 2015 18:56:53 +0000

your article is very good.thank you very much.

Likes(0)Dislikes(0)

By: Humberto

Humberto — Fri, 27 Mar 2015 12:46:04 +0000

In reply to reza.

Thanks reza

Likes(0)Dislikes(0)

By: Humberto

Humberto — Fri, 27 Mar 2015 12:34:22 +0000

In reply to Albert Hoekman.

Ok Albert Hoekman I agree with you 100%.

Likes(0)Dislikes(0)

By: reza

reza — Fri, 27 Mar 2015 09:29:31 +0000

hello mr Rodriguez
thank u for sharing this good article.
by

Likes(0)Dislikes(0)

By: Humberto

Humberto — Thu, 26 Mar 2015 17:10:49 +0000

In reply to Robert Calk.

Ok, I'll contact to Mr. Jestine Yong, and he will say me if one of them (video or article) or both of them. Ok?

Likes(0)Dislikes(0)

By: Albert Hoekman

Albert Hoekman — Thu, 26 Mar 2015 15:42:40 +0000

Humberto, good job.
Because I repair computers and other digital equipment, I woud like to share som more information about e-caps for pc motherboards.

The most important thing for e-caps in computers is the temperature that is written on the e-cap. This should be 105 degrees Celcius. The 105 degrees means that the working temperature of the e-cap is 85 degrees Celcius. That is mostly the temperature inside a computercase used for heavy work like HD-games and video-rendering.
Good brands of e-caps are Yageo, Teapo, Sanyo.

Likes(0)Dislikes(0)

By: babaganatijjani

babaganatijjani — Thu, 26 Mar 2015 09:58:29 +0000

Thanks. My sely and my boys we are all great in nigeria

Likes(0)Dislikes(0)

By: Donna

Donna — Thu, 26 Mar 2015 08:13:46 +0000

Hmmmm, typically the cause for "no video output display" is not bad caps, but rather a degraded SMT solder connections on the GCU CHIP, which is not repairable without a SMT machine. (There are hack repairs that will earn you a few $$ but they rarely last 6 mos, and when clients figure out they've been burned, your reputation is destroyed)

So it's a nice article and everything, but someone is living in a dream world here. Caps rarely go out on the newer machines...the old XP age desktop computer motherboards, but not laptop system boards...so I'm a little skeptical of the entire article, sorry. Been a tech too long, and it doesn't line up at all ...IMO.

Likes(1)Dislikes(0)