Comments on: Must Get Exact Output Voltage? https://jestineyong.com/must-get-exact-output-voltage/ Semiconductors, Test Equipments, Circuit Board Troubleshooting, Electronic Repair Courses and Many More! Tue, 31 Jan 2012 12:01:21 +0000 hourly 1 https://wordpress.org/?v=5.4.24 By: admin https://jestineyong.com/must-get-exact-output-voltage/comment-page-1/#comment-51827 Tue, 31 Jan 2012 12:01:21 +0000 https://www.jestineyong.com/?p=1997#comment-51827 HI Isaac,

Yes it is ok to replace a 10v cap with 16 v cap.

Jestine

Likes(0)Dislikes(0)
]]> By: isaac i. sumani. https://jestineyong.com/must-get-exact-output-voltage/comment-page-1/#comment-51807 Tue, 31 Jan 2012 07:26:16 +0000 https://www.jestineyong.com/?p=1997#comment-51807 here is a repair info. i would like to share to all active members of this site i went through: yesterday i was repairing a decoder, the problem was that when pluged to ac power i found that the led power indicator was blinking, at first i was suspecting of dry joints but it was not after checking for any, i checked and tested all components in primary section and found that ok. then i jumped to secondary section i found that a diode has a very small leakage, i replaced it retest the unit found the same thing blinking, finally i used try and error method that i found that it was a supporting capacitor of 5v that boots microchip processor marked 1000mf 10v and i replaced with 1000mf 16v and the decoder worked again that i did not believe that was it really my handwork, but my wory is on capacitor voltage marking 10v-16v is this oky sir? i need your help please. send me more electronic info. i am proud of your honor sir yong. regards isaac i. sumani, salima-malawi. God bless.

Likes(0)Dislikes(0)
]]>