Comments on: No Display In PC ASUS P5LD-VM Motherboard Repaired

By: beh

beh — Thu, 04 Feb 2016 05:39:08 +0000

TWO things kill electrons and electronics dirt and heat
thanks HUMBERTO for sharing your experiences with us..

Likes(1)Dislikes(0)

By: Humberto

Humberto — Tue, 02 Feb 2016 05:34:16 +0000

Hi Henrique J. G. Ulbrich, In my own opinion I think that the keys are the patience and experience of the repairer. Of course that any kind of tool used is an important factor too.

Likes(0)Dislikes(0)

By: Humberto

Humberto — Tue, 02 Feb 2016 05:28:32 +0000

In reply to Parasuraman S.

Thanks Parasuraman S.

Likes(0)Dislikes(0)

By: Humberto

Humberto — Tue, 02 Feb 2016 05:26:24 +0000

In reply to Robert Calk.

Hi Robert. I´ve always been very careful in not bend any Microprocessors´pins. In this case the pins are located in the socket of the mobo. Thanks.

Likes(1)Dislikes(0)

By: Humberto

Humberto — Tue, 02 Feb 2016 05:21:52 +0000

In reply to Mervin.

Thanks Mervin

Likes(0)Dislikes(0)

By: Henrique J. G. Ulbrich

Henrique J. G. Ulbrich — Fri, 29 Jan 2016 18:11:33 +0000

Good job, Humberto. It's interesting to note that many times just the tools you need are the most simplest one: a prosaic brush and the notorius STAEDTLER eraser. And of course, the knowledge of the repairer.

Likes(0)Dislikes(0)

By: Robert Calk

Robert Calk — Fri, 29 Jan 2016 13:17:56 +0000

Good job, Humberto. I'm glad you didn't bend some pins on the microprocessor.

Likes(3)Dislikes(1)

By: Parasuraman S

Parasuraman S — Fri, 29 Jan 2016 13:15:39 +0000

A Good job that can only be done by an expert like you!

Likes(3)Dislikes(0)

By: Mervin

Mervin — Fri, 29 Jan 2016 08:30:13 +0000

Thats some great experience to think about that.
I've learn something.
Thanks.

Likes(4)Dislikes(0)