Comments on: No power in a microwave oven repaired. Model: ITT M7017PA

By: Waleed Rishmawi

Waleed Rishmawi — Wed, 02 Oct 2013 06:53:38 +0000

In reply to bob lou.

thanks bob. the best thing is to be honest with the customer and when he is happy, he comes back for more.

Likes(0)Dislikes(0)

By: bob lou

bob lou — Tue, 01 Oct 2013 19:28:19 +0000

Good work...we stopped fixing them years ago because of the high cost of parts. And it's good to see an honest repair person, you tell the customer that the part is used, but they are happy to have their oven working again.

Likes(0)Dislikes(0)

By: Espoir

Espoir — Sun, 29 Sep 2013 19:59:25 +0000

Than kyou for that repair tips.

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Sun, 29 Sep 2013 13:23:53 +0000

In reply to Andre Gopee.

please read the comment i sent to Eliazer..he had the same question. God bless you

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Sun, 29 Sep 2013 13:22:17 +0000

In reply to eliazer.

Eliazer: yes, good question. usually the power board for the microwave ovens are not marked. but I know the value of these resistors from experience. these resitors usally have their value printed on them and I have came across alot of open bad resistor butt value was still printed on them. I hope this answers your question. I have plenty of these power boards in my shop that I get from used microwave ovens. they help me to get the cost down and keep the custoner happy with the service I am providing. I also tell the customer that I am using second hands parts and they are ok with it as long the microwave ovens work and the price of the repair is low.

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Sun, 29 Sep 2013 13:12:39 +0000

In reply to beh.

Hi Beh. I have plenty of them in my shop. they are not brand new ones. the new ones are very expensive to get. I know of a place that sells old microwave ovens and buy a lot of them for really cheap price. then I take them apart and use them for my repair. keep in mind that I tell the customer that the magnetron are used not new.

Likes(0)Dislikes(0)

By: Andre Gopee

Andre Gopee — Sat, 28 Sep 2013 17:31:43 +0000

I myself would like to know how did he find out the value and wattage of the resistor. I can see from the photo where the resistor are missing and the markings, but not the value.
Andre

Likes(0)Dislikes(0)

By: Richard

Richard — Sat, 28 Sep 2013 16:26:26 +0000

In reply to Jestine Yong.

Thanks for the tips. I really enjoy them.

Likes(0)Dislikes(0)

By: Jestine Yong

Jestine Yong — Sat, 28 Sep 2013 02:35:08 +0000

In reply to eliazer.

HI Eliazer,

Thanks and I will leave to Waleed to answer that question since he is the one that had repaired the oven.

Jestine

Likes(0)Dislikes(0)

By: Robert

Robert — Sat, 28 Sep 2013 00:09:53 +0000

Thanks for the tips, Waleed.

Likes(0)Dislikes(0)