Comments on: One Vertical Or Horizontal Line Across LCD Monitor Screen

By: Jestine Yong

Jestine Yong — Wed, 27 Apr 2016 03:52:36 +0000

In reply to Mangalore Cafe (@mangalorecafe).

If by pressing it and the lines gone this means there is a dry contact in the TCP (Tap[e carrier package). It would be very difficult to join it back if you do not have the right tools (hot press bonding machine). Cleaning with alcohol or other cleaners will not solve this problem.

Jestine

Likes(0)Dislikes(0)

By: Mangalore Cafe (@mangalorecafe)

Mangalore Cafe (@mangalorecafe) — Mon, 25 Apr 2016 18:03:23 +0000

In reply to admin.

Could you please elaborate on "No dry joints".
The line in my monitor appeared after I cleaned it with Windex/Colin. The cleaner liquid went into the side of the monitor. Now i have a some pixels turned white there and also a half moon halo(cloud patch but its clear only the light half circle halo).
Then the line comes from the bunch of white pixels.
My mome had come and found my monitor dusty so she cleaned it while it was off. When I returned I saw my monitor was bent forward.
When I opened it I saw the white pixels had reduced and the line was gone.
The half moon halo was still there.

After 3 months the line appeared again. I had to tap it it would go.
Now again it started getting persistent and no amount of tapping would make it go.
So I pressed it at the bezel and its gone.

So I was wondering if this could be the cleaner liquid that went inside and spoiled the connector or the ribbon inside?(or whatever is inside you would know better you are the expert 🙂 ).

I wanted to ask you if opening and cleaning it with some alcohol or other cleaners will help solve the problem permanently?

Please Advise. Thank you

Likes(0)Dislikes(0)

By: Jestine Yong

Jestine Yong — Thu, 10 May 2012 17:10:15 +0000

In reply to Affzan.

Hi Affzan,

Wow! good to know that your company could provide such repair services. I will bookmark your website. What about the price of fixing a 17" 19" and 22" LCD PANEL with vertical problem? How long will it take?

Jestine

Likes(0)Dislikes(0)

By: Affzan

Affzan — Wed, 09 May 2012 15:13:46 +0000

Dear Jestine
Our company can repair this type of problem. Normally this is caused by faulty TAB IC inside the LCD panel and fortunately we have the equipment to repair it. Our technology comes from Korea and we have been operating since last year. Kindly visit our website and our FB page for more information
http://www.myungmalaysia.com/services/
https://www.facebook.com/myungmalaysia
Thank you very much
Affzan

Likes(0)Dislikes(0)

By: admin

admin — Fri, 04 Feb 2011 03:22:18 +0000

HI Amamrsingh,

Check the vertical output ic. Make sure there is supply voltage to the ic and no dry joints. If all check to be good then direct replace the vertical output ic and retest.

Jestine

Likes(0)Dislikes(0)

By: amarsingh

amarsingh — Thu, 03 Feb 2011 17:49:54 +0000

My CRT screen got horizontal line . How it can be repair

Likes(1)Dislikes(0)

By: admin

admin — Tue, 28 Dec 2010 14:05:36 +0000

Hi Abdullah,

I suggest that you buy my ebook at http://LCD-Monitor-Repair.com because it comes with my personal support just in case if you have problem in solving LCD Monitor problem.

Jestine

Likes(0)Dislikes(0)

By: abdullah

abdullah — Tue, 28 Dec 2010 06:23:26 +0000

sir , i am very interested in learning advance lcd monitor repairing but i am not able to leave my place due to my responsibilities of my bussiness , i am into traininng for networking..... so on,.... so pleae suggest me to do what... ?

thank for providing such a site...

Likes(0)Dislikes(0)

By: admin

admin — Tue, 13 Oct 2009 11:14:44 +0000

HI Tom,

Thanks for sharing your tip. It was fantastic!

Jestine

Likes(0)Dislikes(0)

By: Tom Asbury

Tom Asbury — Mon, 12 Oct 2009 15:55:18 +0000

I had an increasingly persistant horizontal line on a 2006 Dell Inspiron 1300. I'd like to tell you how I fixed it, since your site came up very near the top on my google search of the problem, and I've never seen this solution anywhere.

When I opened up the laptop, there was a line across the display, always the same place. Wiggle the top, sometimes it goes away. One day, on a whim, I squeezed the case top around the area of the line. The line went away.

Finally, I read the Service Manual on how to remove the display bezel. Then, not removing ANY PART OF THE DISPLAY ASSEMBLY, I pulled the little pads and screwed the bezel down tight. ALL THE SCREWS WERE LOOSE. Not surprising, really, the unit has been in daily use for three years. Problem solved. If I open the display far enough I can still get the line to appear, but that is nearly 180 degrees open, which is not a problem. I have not seen the line since.

Hope this helps someone.

Tom

Likes(1)Dislikes(0)