Comments on: Picture Shaking Problem In CRT TV Fixed

By: Frank Terzo

Frank Terzo — Sat, 15 Feb 2020 00:10:41 +0000

In reply to Waleed Rishmawi.

Hello what causes crt jumpy shakey picture problem and flickering

Likes(1)Dislikes(0)

By: henok

henok — Sun, 28 Apr 2019 18:59:24 +0000

Very helpful article. thank you.

Likes(0)Dislikes(1)

By: KENETH

KENETH — Thu, 27 Dec 2018 17:52:45 +0000

This article is wonderful, but just that no image of the preset was not attached, some of us don't understand names of must of this part

Likes(0)Dislikes(0)

By: safiqur rahamann

safiqur rahamann — Sat, 19 Aug 2017 12:10:10 +0000

panasonic crt tv picture shaking vertically, remote menu button is not receiving by tv though there is light from menu button. I checked by mobile camera. before that eht or light was not coming regularly.sound ok. screen blue light in av mode vanished. power at all cathods nearly 140 v. what may be the cause, please anyone suggest.

Likes(0)Dislikes(0)

By: mani

mani — Tue, 25 Apr 2017 23:31:27 +0000

14" CRT TV shaking problem. so how is solve the problem. pls help me.

Likes(0)Dislikes(0)

By: shivakumar

shivakumar — Wed, 20 Apr 2016 06:19:55 +0000

Dear Friends, I have a LG FLATRON TV, There is picture shacking vertically, and collapse with off screen , its moving up-down. please help me in this case, should I change all the capacitor of the PCB?

Likes(3)Dislikes(0)

By: Sarwar Khan

Sarwar Khan — Mon, 02 Feb 2015 07:38:56 +0000

A very good article. Have you faced / solved shaking picture problem in LCD also ? Kindly share results. Thanks.

Likes(0)Dislikes(2)

By: Amir Mukhtar

Amir Mukhtar — Wed, 19 Nov 2014 04:49:26 +0000

Thanks you for sharing Informative Repair Solutions .

Mr Yogesh Panchal you did great Job .

Great work

Amir Mukhtar Ashrafi

Likes(1)Dislikes(0)

By: Amir Mukhtar

Amir Mukhtar — Wed, 19 Nov 2014 04:48:09 +0000

In reply to Yogesh Panchal.

Good Job Yogesh . Keep sharing Expetise Work to learn more .

thanks you
Amir

Likes(1)Dislikes(2)

By: Yogesh Panchal

Yogesh Panchal — Mon, 27 Oct 2014 16:57:37 +0000

In reply to jojogreg.

jogger,
This 2k Preset is located in power supply section which control Output voltage.As for CRT TV +B volt at HOT Collector working voltage should be around 95 to 115V DC (Please confirm / refer to circuit Diagram of respected model)where i am getting 90VDc.Hence when i tried to adjust the voltages from this preset but there is no voltage improvement on HOT collector Voltage on that i have doubt about this preset and i have tested it out of circuit and i found this preset bad.

Likes(4)Dislikes(1)