Don't Miss

Printer Repair Course

By on September 17, 2008

As for me i don’t teach printer repair. The printer repair course was conducted by my long time good partner Mr William. He has over 10 years of experience in Printer repair which include the inkjet, dot matrix and the laser jet. We had stopped repairing the inkjet and deskjet printer due to the new price of these printers are very cheap. Besides getting the spare parts for these printers were not easy and very expensive too. Most of the customers opt to buy a new printer then repair the inkjet and the deskjet printer.

The duration of the Basic printer repair course is only two days and Mr William will share all of his experience on how to solve printer problem fast. He release many of his troubleshooting techniques to his students and most importantly he provide support to those who had attended the course. With this kind of service, participants/students will not be left out and whenever they face problem they could bring along the faulty printer to our office for troubleshooting purposes. Here are the photos taken during the course:

printer repair course

printer repair course

printer repair course



  1. ram kumar

    June 15, 2009 at 11:17 pm

    hello sir,
    am ram Kumar from India my tvs msp 345 printer some problem
    power supply & logic board working good but my printer restart again restart (i think mechanism problem)
    what problem my printer please tell me sir
    i wait yours reply

  2. admin

    June 16, 2009 at 8:59 pm

    HI Ram,

    If the printer always restart again then you have to make sure the smps is producing a good and stable output. And assuming the output are all good then suspect a bad mainboard.


  3. zeb

    March 5, 2010 at 11:46 pm

    how can mechanism problems be solve

  4. admin

    March 6, 2010 at 9:07 am

    HI Zeb,

    This you have to analyze how all the gears and solenoids work. Once you have understood about the mechanism of printer you then can proceed to troubleshoot it when have problem.


  5. fairos

    April 6, 2010 at 11:51 am

    like to know how to join printer repair course.

    thank you.

  6. admin

    April 6, 2010 at 8:55 pm

    HI Fairos,

    May i know where are you from?


  7. bramaiah

    August 15, 2010 at 5:12 am

    wanted printers tranning courses

  8. admin

    August 15, 2010 at 11:27 am

    Hi Bramaih,

    Sorry we currently no longer accept international participants.


  9. saravanan

    November 3, 2010 at 1:08 am

    Dear sir,
    I am working as a teacher and very much interesting in repairing electronic gadgets so, is there any course in INDIA to acquire the knowledge of repair please suggest me to avail the facilities

  10. admin

    November 3, 2010 at 5:07 am

    HI Saravanan,

    Try this link:


  11. Tomy

    April 30, 2011 at 11:30 am

    My printer always show blinking with power light and when I connect to computer it shows unrecognized. Please help me what should I do ?

  12. admin

    May 2, 2011 at 6:02 am

    HI Tomy,

    What kind of printer and what model?


  13. mohammed

    January 20, 2012 at 2:49 am

    this good but i cannot buy

    because paypal isnot available in our country

  14. admin

    January 20, 2012 at 2:38 pm

    HI Mohammad,

    May i know what do you want to buy?


  15. mohammed

    January 20, 2012 at 8:06 pm

    i want to buy printer course

    yours products were avaible in click bank

    and now not available

  16. admin

    January 20, 2012 at 8:35 pm

    Hi Mohammed,

    Sorry i do not sell printer repair course and you will not find it at clickbank. If you want to buy my partner ebook on print head repair you can go to the below website



Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.