Comments on: PS4 Controller That Does Not Charge Repaired

By: Waleed Rishmawi

Waleed Rishmawi — Wed, 03 May 2023 07:44:04 +0000

In reply to Maurizio.

Maurizio: hi. I use a none branded cheap low solder melt that a friend of mine from USA sent to me. today I used it on a heater board IC that was surrounded with plastic and it came off in no time.. have a blessed day

Likes(0)Dislikes(0)

By: Maurizio

Maurizio — Tue, 02 May 2023 13:28:29 +0000

In reply to Waleed Rishmawi.

Hi Waleed, I am just curious: which low melt solder do you use (brand) and if it easily available in your Country.

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Tue, 02 May 2023 05:42:41 +0000

In reply to Parasuraman S.

Parasuraman: thanks man. have a blessed day

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Tue, 02 May 2023 05:42:23 +0000

In reply to Albert van Bemmelen.

Albert: the low melt is not that expensive and very usefull in many situations in the smd repair. I use it a lot in HDMI ports on play stations..it is the best thing to have. have a blessed day

Likes(1)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sat, 29 Apr 2023 11:09:16 +0000

Very professional fix!

Likes(3)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Sat, 29 Apr 2023 09:28:02 +0000

I never used low temp solder before because it is still rather expensive. But this was again another repair example that showed its useful purpose!

Likes(5)Dislikes(0)