Radio Receiver Repaired
A friend of mine brought to me this radio receiver brand OPTIMUS (AM/FM), I do not know the Model No.: because it was erased, it’s an old model.
Let’s disarm it, I said to him.
Only a few screws for taking out the back cover.
Then I decided to take out the PCB for checking on the audio out.
In the meantime I was moving around the PCB look in the photo below what happened.
As you can see the magnet of the speaker was loose, I confess I’ve seen this kind of situation with speakers a lot of times. The magnet was put into its place and glued with Krazy glue.
Now the receiver can be heard very well, and that’s all.
This article was prepared for you by Humberto Rodriguez, one of our ‘Master Authors’ from Cuba.
Please give a support by clicking on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments.
P.S- If you enjoyed reading this, click here to subscribe to my blog (free subscription). That way, you’ll never miss a post. You can also forward this website link to your friends and colleagues-thanks!