Comments on: Repaired No Power Problem In HP VS19e 19″ LCD Monitor

By: admin

admin — Sun, 30 Aug 2009 07:28:59 +0000

Hi Ivonne,

Some call it as common fault.

Jestine

Likes(0)Dislikes(0)

By: Ivonne

Ivonne — Fri, 28 Aug 2009 13:58:43 +0000

would you say this is a factory defect?

Likes(0)Dislikes(0)

By: admin

admin — Mon, 13 Jul 2009 23:36:39 +0000

Hi Ron,

After the display shutdown what was the colour of the POWER LED? As for the CTX yes it could be the cap, high voltage transformer fault or dry joints or even bad back light.

Jestine

Likes(0)Dislikes(0)

By: Ron

Ron — Sun, 12 Jul 2009 14:21:43 +0000

I have a 20 inch hp lcd powers on then off if I pull video cable and replug in works for several second. Had a ctx did same thing was the plastis capacitors next to transformer .There is a plastic capacitor next to transformer in c824 pp 103j 630.5 volts.Wondering if it could be problem or any suggestion would be appreciated Thank You Ron

Likes(0)Dislikes(0)

By: admin

admin — Wed, 03 Sep 2008 12:17:18 +0000

Hi Mihailo,
Sorry i have sent the Monitor back to the customer otherwise i would open it and let you know the value.

Jestine

Likes(0)Dislikes(0)

By: Mihailo

Mihailo — Tue, 02 Sep 2008 20:24:41 +0000

OK, it is very nice explanation. My problem is that someone already worked on the power supply module. So now the filter capacitor (C805)is 100uF/400V, resistor (R836) now is 100ohmm, and resistor (R813) now is 2x100ohm connected in line (100+100). So if I want to change IC, first I need to be sure if above mentioned values are original or not.
If not, I'm kindly asking you to send me, over the mail kometimajkubre@hotmail.com, the original values.
Thank you in advance

Likes(0)Dislikes(0)