Comments on: Revisit Of Prestige Induction Cooker Model PIC 1.0 V2 After Four Years

By: Parasuraman S

Parasuraman S — Mon, 23 Sep 2024 15:12:52 +0000

Yes, in these types of boards, it is better to replace all the button switches at a time to avoid return of the cooker soon! Thanks for your comments, dear friend!

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 23 Sep 2024 08:37:57 +0000

yes, that is the best way to go by replacing all of them otherwise some buttons may not function that way it should be. thanks for sharing and have a blessed day

Likes(2)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sun, 22 Sep 2024 05:32:15 +0000

In reply to Imoudu.O.

Many users do not take trouble to keep the Induction Cooker tidy and clean. Cockroaches can damage any electronic circuit and I call them our agents for getting defective sets (LOL) Many thanks, dear Imoudu!

Likes(2)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sun, 22 Sep 2024 05:30:22 +0000

In reply to Yogesh Panchal.

Yes, and it won't show in any multimeter checking! Thanks, dear!

Likes(2)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sun, 22 Sep 2024 05:29:38 +0000

In reply to Albert van Bemmelen.

Oh! Well equipped to face all calamities!

Likes(3)Dislikes(0)

By: Imoudu.O

Imoudu.O — Sat, 21 Sep 2024 20:40:51 +0000

It seems those press buttons didn't last long as they were also changed 2020 too, or is that their life span? I presume prestige brand is high quality brand.Well thanks for sharing sir.

Likes(2)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 21 Sep 2024 16:22:32 +0000

Good Job! Sir,
sometimes Leakey switch is mind boggling for troubleshooting.

Likes(2)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Sat, 21 Sep 2024 16:05:36 +0000

In reply to Parasuraman S.

If we use the flame fast and only shortly it will not leave any black or burned spots on walls at all. I mostly just have to watch not to burn or ignite any easy fast burning material (like nylon clothes etc.) being targeted while trying to burn those creepy 'fish' from the wall (or floor too sometimes!).
And I always have a bucket with water standing by just in case for safety (including 4 firedetectors in most of my rooms). Also to water the plants in my apartment with warmer water when the tap water gets too cold in winter not to scare the plants too much.

Likes(3)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sat, 21 Sep 2024 13:05:31 +0000

In reply to Albert van Bemmelen.

Thanks for your expert and elaborate comments and sharing detailed study on silverfish. We do have silverfish attacks in books and in a few other lurky places. It was real fun reading about how you catch the silverfishes! Will not the gas burner leave marks on the walls and other places, then? Anyhow, it was interesting reading especially being very different subject of pest control!

Likes(3)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Sat, 21 Sep 2024 11:39:27 +0000

Excellent job in fixing these several times going out of order devices. Like often the television sets that revisit you. They always completely keep getting repaired no matter how hard cochroaches and other pests are trying to reclaim it back to nature!
In my country it are mainly the small silverfish or paperfish that mostly in the dark crawl out of their tiny cracks in walls and other places. Apparently the eggs of these 'fish'can hatch at 22 degrees Celsius and humidity of 33%. They develop optimally at 37˚C and 80% humidity a nymph moults 7 to 8 times. And I mostly succesfully 'catch' them by frying them with a portable gasburner of any wall while holding a small tub filled with some water under them to catch them and kill them afterwards! (because trying to catch them the normal way is hard because they are very fast!). They mainly eat paper or starch from potatos or similar and luckily do not harm electronic devices yet!

Likes(4)Dislikes(0)