Comments on: Samsung Phone Charger Consistently Repaired

By: Kelvin

Kelvin — Fri, 25 Aug 2023 02:52:05 +0000

Job well done

Likes(0)Dislikes(0)

By: Imoudu.O

Imoudu.O — Sun, 30 Jul 2023 20:19:17 +0000

Waleed.R
Hi friend,
l did repair this charger because of its quality and its expensive in my country to replace, moreover there are fake of this same charger in market, with different fake smps board inside.Thanks for your comments and have a nice day.

Likes(3)Dislikes(0)

By: Imoudu.O

Imoudu.O — Sun, 30 Jul 2023 20:09:42 +0000

Parasuraman.S
Thanks for your comments sir.

Likes(2)Dislikes(0)

By: Imoudu.O

Imoudu.O — Sun, 30 Jul 2023 20:04:52 +0000

Albert van
You were smart enough to see that socket though,I appreciate your information and comments.Have a nice day sir.

Likes(4)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sun, 30 Jul 2023 14:52:52 +0000

Good Fix! Imoudu

Likes(2)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sun, 30 Jul 2023 13:59:57 +0000

Servicing such small but complicated and minute devices is a thrill! Many thanks for sharing!

Likes(3)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Sun, 30 Jul 2023 12:57:41 +0000

Theses chargers are not easy to repair but it is possible to repair . I have repaired some but did not like the experience so I stopped doing that and bought new charger instead. Thanks for sharing and have a blessed day

Likes(3)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Sun, 30 Jul 2023 12:24:47 +0000

Nice job Imoudu! And you were smart enough to immediately place the replacement PWM 8 pins dip chip on a decent 2.54mm socket!
I myself always prefer the more expensive machine dip sockets for more expensive devices. Because the bus sockets are more reliable and lesser wear out than those springy clamp sockets. In time they do not clip strong enough on the chip legs to hold it in place which causes the chip to move up out of the socket on its own. Which could cause unexpected defects.

Likes(4)Dislikes(0)