Comments on: SAREGAMA CARVAAN MINI Radio Intermittent Power On & OFF

By: Yogesh Panchal

Yogesh Panchal — Tue, 08 Sep 2026 07:52:38 +0000

Hi Waleed,
It’s been a long time since we heard from you; I hope everything is well at your end.

Instead of waiting for materials, it is wise to keep a stock of commonly used, essential parts; this makes the work proceed quickly and makes the job enjoyable.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Tue, 08 Sep 2026 07:46:46 +0000

In reply to Mark J.

Yes MarkJ
for TV Repair he is having right practical approach for troubleshooting.

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 07 Sep 2026 05:56:35 +0000

I recently bought alot of microw switches, different shapes and sizes and I am glad I did because there is a lot of demand for this kind of/on switches. I am glad it worked out for you. thanks for sharing and have a blessed day

Likes(1)Dislikes(0)

By: Mark J

Mark J — Sun, 06 Sep 2026 19:17:55 +0000

In reply to Yogesh Panchal.

Yogesh that was a good video and youtube page. He has some good lcd tv repair tips.

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sun, 06 Sep 2026 08:54:26 +0000

Imoud.O
High-quality flux is always useful, and practice is essential; however, I have seen technicians perform SMD soldering using a standard 60W soldering iron with a chisel tip. Perfection in the work comes only through practice. Nevertheless, I would advise technicians to upgrade their tools in line with job requirements and technological advancements, as this is a one-time investment that brings job satisfaction and peace of mind.

I am sharing a link that shows how technicians use a 60W soldering iron with a wide tip.

https://www.youtube.com/watch?v=3PiCK-4ZBXk

Likes(2)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sun, 06 Sep 2026 08:05:26 +0000

In reply to Mark J.

Thank You! Mark J

Likes(1)Dislikes(0)

By: Imoud.O

Imoud.O — Sat, 05 Sep 2026 21:02:03 +0000

Yes you may be right about using regular soldering iron on this kind of switch replacement,however since I don't have pen soldering iron, I once used regular soldering iron with pointed iron tip,but to be honest it was not a clean soldering, plastic part of switch melted a bit,succeeded at last,thanks for sharing sir

Likes(1)Dislikes(0)

By: Mark J

Mark J — Sat, 05 Sep 2026 19:33:20 +0000

Good professional job Yogesh.

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 05 Sep 2026 15:12:57 +0000

Thank you! Sir,
It is by observing the way you and other technicians work, as well as your approach to handling tasks, that I have learned to take on a role like this. All this enthusiasm stems from that.

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 05 Sep 2026 15:03:17 +0000

In reply to Albert van Bemmelen.

Thanks! Albert for your comment,

Using a soldering iron depends on practice and experience. I have seen many technicians successfully using the older type of soldering iron, but a single wrong move can ruin the job.
Investing in a good micro-soldering workstation is always beneficial. Due to various limitations, such repair work is now typically performed within the workshop, and using high-quality solder paste yields excellent results.

Likes(2)Dislikes(0)