Comments on: Seagate GoFlex External USB HDD Intermittent Working Solved

By: Yogesh Panchal

Yogesh Panchal — Thu, 20 Aug 2020 07:45:44 +0000

Thank You! Humberto

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 20 Aug 2020 07:45:18 +0000

In reply to Waleed Rishmawi.

Thanks! waleed.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 20 Aug 2020 07:44:42 +0000

In reply to Parasuraman S.

Your Welcome!Sir

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 20 Aug 2020 07:43:56 +0000

In reply to Albert van Bemmelen.

Absolutely Right! Albert,
This is because of stiff cable it does not bend easily hence making load on connector.

Likes(0)Dislikes(0)

By: Humberto

Humberto — Wed, 19 Aug 2020 03:44:19 +0000

Good repair, Yogesh

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 17 Aug 2020 12:05:24 +0000

my favorite kind of repair jobs. I have the microscope for such jobs and it is amazing. keep up the good work and have a blessed day

Likes(0)Dislikes(0)

By: Parasuraman S

Parasuraman S — Sat, 15 Aug 2020 14:53:47 +0000

"rather than using old type hard paste that you have to scrap it from the PCB using some pointing device to clean" - can be said only by such experienced people like you! Well done! Many thanks for the tips!

Likes(1)Dislikes(0)

By: Albert van Bemmelen

Albert van Bemmelen — Sat, 15 Aug 2020 11:25:58 +0000

Those Blue USB 3.0 cables are indeed way too stiff to use without causing any problems in time! I know this from my brandnew external USB 3.0 two-and-a-half inch hdd that won't work if I position the cable wrong. Like those stiff HDMi cables which do not take much before the wires or the plugs brake.

Likes(4)Dislikes(0)