Comments on: Someone Asked How to Find Dry Solder Joint

By: Yogesh Panchal

Yogesh Panchal — Wed, 02 Oct 2024 09:27:05 +0000

In reply to Hilario.

Hilario,
Thanks! for your comment.
just open the article in Google web browser Select highlight the required material form google chrome give print command, in print destination select & save as PDF.

Likes(0)Dislikes(0)

By: Hilario

Hilario — Sun, 29 Sep 2024 10:37:13 +0000

Hi,
This is very good article and I appreciate alot.It is possible Send This article in PDF so I can download please.

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Tue, 17 Sep 2024 14:53:28 +0000

In reply to Mark J.

Thanks!Mark J

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 12 Sep 2024 14:26:28 +0000

your welcome Jose

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Thu, 12 Sep 2024 14:25:00 +0000

In reply to Kevin Davison.

Thanks!Kevin

Likes(1)Dislikes(0)

By: Jose

Jose — Wed, 11 Sep 2024 12:41:32 +0000

I was one of the ones that asked about cold joints. Many thanks Mr Panchal for a very clear and thorough article.

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Mon, 09 Sep 2024 06:45:21 +0000

Thanks! for you input Philip,
you are right Philip,steel wire brush is very useful for cleaning soldering tip rather using File tool or sand paper. which shorten the life of soldering iron tip.i personally use utensil scrubber steel.as far as fume is concern it is toxic for health always use Fan to exhaust or blow to keep away fumes from inhaling.using gloves depends on personal preference & personal comfort.

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Mon, 09 Sep 2024 06:28:35 +0000

In reply to Anwar Yunas Shiekh.

Best Combination Anwar bhai

Likes(1)Dislikes(0)

By: PHILIP

PHILIP — Sun, 08 Sep 2024 17:58:49 +0000

You certainly couldnt have been more elaborate Yogesh. The entire demonstration with nice drawings beats a video lesson by far. Please allow me to add that a small steel-wire brush is such a necessity that constanty gets rid of the never ending dust accumulation at the tip of the soldering gun, which otherwise prevents full heat transfer to the soldering wire to melt effectively. And I remember once Albert adviced us to adapt the habit of using a face mask as soldering wire smoke is harmful when inhaled. And how about putting on gloves to prevent burning our fingers? Burning fingers is what makes us sometimes to blow to soothe them

Likes(1)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sun, 08 Sep 2024 10:27:31 +0000

Thanks! GIFT ELIJAH,
More practice is required for SMD Soldering in mobile & laptop repairing.you can practice on junk PCB.

Likes(1)Dislikes(0)