drill repair | Electronics Repair And Technology News

Drilling Machine Repaired

Jestine Yong — Thu, 13 Jan 2022 23:22:09 +0000

A customer brought this drilling machine for repair and explained the issue to me. He said if he wiggles the power cord, the machine would work but he starts to see sparks then the machine goes into shut down. The customer put an electrical tape around the cord and according to the customer it worked […]

The post Drilling Machine Repaired first appeared on Electronics Repair And Technology News.

Fifteen Corroded Batteries Found In Dewalt DCD-950 Driver/Hammer/Drill

Jestine Yong — Mon, 21 Dec 2020 12:55:08 +0000

This DeWALT Driver/Hammer/Drill model DCD-950 belonged to my colleague in the hospital and was brought to me with the complaint that the RED LED comes and goes off when put to charge and it does not work on battery. The battery compartment is push-in type […]

The post Fifteen Corroded Batteries Found In Dewalt DCD-950 Driver/Hammer/Drill first appeared on Electronics Repair And Technology News.

Makita Hammer Drill Phase Repaired

Jestine Yong — Mon, 10 Nov 2014 12:56:40 +0000

I was given a cordless Makita hammer drill that had an intermittent fault. It would work sometimes and other times it would give very weak movement and would only start again if you tapped the side of the drill. After pulling the side covers off, […]

The post Makita Hammer Drill Phase Repaired first appeared on Electronics Repair And Technology News.