All posts tagged "testing equipment"

• 
  Fixing A Defect But Brand New UNI-T Tweezer Tester

  On 12 March 2023 a brand new Uni-T UT116A SMD tweezer tester was ordered from the Uni-T meter store and received about 8 days later in that month. Although everything worked it had a bad sliding function...

  • Posted May 27, 2023
  • 16
• 
  Leaked Capacitors Caused Dim Display And ‘Low Battery’ Indication In PEAK ATLAS DCA55

            This is my handy tool and when it showed ‘low battery’, I opened it for replacement and found that the battery had leaked and corroded the contacts. This was a few months...

  • Posted May 10, 2021
  • 13
• 
  Another Adapter Repaired 4.2V 0.5A And Tested Using Supertip

  This small adapter repair was put aside for quite some time after I already had repaired all obvious defects and had also fixed a burned through copper track. And because the 4.2V 0.5A adapter board still refused...

  • Posted January 22, 2021
  • 16
• 
  Servicing Philips TV Tester 808/TVT

                    It must be somewhere around the mid of 1980s that I got a chance to include TVs in the range of electronic devices that I repaired. It was...

  • Posted December 30, 2016
  • 17
• 
  Accuracy, Precision and Resolution

                While reviewing and polishing my notes for another training course in Electrical/Electronic Measurements I thought I could share this important chapter. Because the terms Accuracy, Precision and Resolution are too...

  • Posted November 13, 2015
  • 38