Don't Miss

All posts tagged "Vacuum Cleaner Repair"

  • how to repair vacuum cleaner
    Shark Upright Vacuum Cleaner Repaired 

                  A customer brought in a Shark upright vacuum cleaner that would not work. They had also noticed that for some time the roller head feature had not worked. So, I...

    • Posted September 8, 2020
    • 14
  • how to repair vacuum cleaner
    A Fault In A Working Vacuum Cleaner Repaired

              A vacuum cleaner was brought by a customer for repair. He said that it was working fine but the lever that controls the speed of the motor is faulty. It is a...

    • Posted July 15, 2020
    • 6
  • how to fix a sanyo vacuum cleaner
    Fixed A Broken BPL-SANYO Vacuum Cleaner

                MAKE AND MODEL: BPL-Sanyo Vacuum Cleaner model BSC2002 COMPLAINT: Dropped from a height of about 6 feet and the cabinet case broken inside and outside. HISTORY: This is a Vacuum Cleaner...

    • Posted June 5, 2020
    • 10
  • motor schematic
    Dyson DC08 Vacuum Cleaner Repair (With Video)

                      As with all things, parts eventually wear out and need replacement. This Dyson vacuum cleaner has been part of our household since about 2002, when this model was...

    • Posted August 27, 2018
    • 16
  • vacuum-cleaner-batteries-replacement
    Electrolux Vacuum Cleaner Battery Replacement

                    ‘Stick’ vacuum cleaners are used for smaller jobs because they are light, easily maneuverable and don’t need a long power cord attached to operate. One of the major problems...

    • Posted October 12, 2016
    • 36
  • vacuum cleaner repair
    Samsung Vacuum Cleaner Repaired

                        The problem of this vacuum cleaner was intermittent problem. Sometimes the motor could work and sometimes don’t. It consists of only one circuit board and there were...

    • Posted September 22, 2014
    • 23
  • vacuum-cleanerrepairing
    A handheld noisy vacuum cleaner repaired. Model: Philips FC6050

                  When this handheld vacuum cleaner was brought to my shop and I powered it up, it was very noisy and the sucking on this machine was also weak. I was...

    • Posted June 26, 2014
    • 0
Free Report