Comments on: Welding Machine Powers On But Does Not Weld Repaired

By: Aword J Stephen

Aword J Stephen — Wed, 21 Sep 2022 23:13:44 +0000

Well that was very good,boy I had one at my work shop for a costumer and it wasn't welding, power is going in the machine comes on but no welding, I think I will speak to the costumer, brilliant brilliant,,

Likes(0)Dislikes(0)

By: William Shaw

William Shaw — Tue, 20 Sep 2022 01:22:56 +0000

Great pictures documenting the repair. And thank you, Gift, for asking that question.

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Mon, 19 Sep 2022 07:42:24 +0000

In reply to Yogesh Panchal.

Yogesh: thanks for the advice but I always put a mask on when I plow out dust and I usually do it in a any open space not inside. have a blessed day

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Sat, 17 Sep 2022 06:49:32 +0000

In reply to GIFT ELIJAH.

Gift: thanks man. the ohm readings is different from one machine to another but usually should be a high ohm reading some 700 ohm and higher. if very low ohm reading or no reading, check the Mosftes, or IGBT's or the connections inside the machine. have a blessed day

Likes(1)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Sat, 17 Sep 2022 06:46:41 +0000

In reply to HECTOR DELATORRE.

Hector: thanks man. have a blessed day

Likes(0)Dislikes(0)

By: Yogesh Panchal

Yogesh Panchal — Sat, 17 Sep 2022 06:22:24 +0000

Good Repair! Waleed
Highly Recommend to wear face Mask while Blowing Dust,Take care of the health first.Now a days repairing of electronics equipment's need many another skills to Learn as you did here by making copper strip and arranged properly to fit it.

Likes(0)Dislikes(0)

By: GIFT ELIJAH

GIFT ELIJAH — Fri, 16 Sep 2022 03:11:02 +0000

Good fix detailed checks, but what is the expected ohms value from the two outlet points?.
Still learning.

Likes(1)Dislikes(0)

By: HECTOR DELATORRE

HECTOR DELATORRE — Thu, 15 Sep 2022 13:22:59 +0000

really nice article continue to do a good job

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Thu, 15 Sep 2022 12:57:17 +0000

In reply to AdamS.

AdamS: thanks man. have a blessed day

Likes(0)Dislikes(0)

By: Waleed Rishmawi

Waleed Rishmawi — Thu, 15 Sep 2022 12:56:54 +0000

In reply to Paris Azis.

Paris: this is a turkish made welding machine and they were built in a very cheap way to attract none professionals but sad to say it is used by professionals as well and so often I get his kind in the shop for repair. have a blessed day

Likes(1)Dislikes(0)